Upload your cheat tables here (No requests)
-
DrWolfman
- Cheater

- Posts: 33
- Joined: Thu Aug 10, 2017 4:23 am
- Reputation: 2
Post
by DrWolfman » Thu Jan 31, 2019 11:20 pm
TheyCallMeTim13 wrote: ↑Tue Jan 29, 2019 8:41 pm
SunBeam wrote: ↑Tue Jan 29, 2019 4:28 pm
@Tim: Just freakin' backtrace from the
visibility hook. Audio is nearby. I suggest you simply start by RET-ing the function in which the visibility hook is. See if that makes any difference when you move around; if not, exit that function and head to its prologue; RET here as well. Repeat till you find a location where, if RET applied, fuckers don't hear you. Then start the normal trace inside that function and see where the check is
So, the function it's read in (camo level hook), I get a funny dance after trying to move forward.
Code: Select all
{
Process : mgsvtpp.exe - (x64)
Module : mgsvtpp.exe
Game Title : mgsvtpp
Game Version : 1.0.15.0
CE Version : 6.7
Script Version : 0.0.1
Date : 01/29/19
Author : TheyCallMeTim13
Name : NoVisabilityHook
No Visability Hook
48xxxx48xxxxxx48xxxxxx48xxxxxxxx41xx41xx41xx41xx48xxxxxxxxxxxx
488BC4488958104889701848897820554154415541564157488DA848FEFFFF
}
{$STRICT}
define(address, mgsvtpp.exe+12C7580)
define(bytes, 48 8B C4)
////
//// ------------------------------ ENABLE ------------------------------
[ENABLE]
aobScanModule(aobNoVisabilityHook, mgsvtpp.exe, 488BC4488958104889701848897820554154415541564157488DA848FEFFFF)
//i2aobScanModule(aobNoVisabilityHook, mgsvtpp.exe, 488BC4488958104889701848897820554154415541564157488DA848FEFFFF)
define(injNoVisabilityHook, aobNoVisabilityHook)
assert(injNoVisabilityHook, bytes)
//i2assert(injNoVisabilityHook, bytes)
registerSymbol(injNoVisabilityHook)
////
//// ---------- Injection Point ----------
injNoVisabilityHook:
db C3 90 90
////
//// ------------------------------ DISABLE ------------------------------
[DISABLE]
////
//// ---------- Injection Point ----------
injNoVisabilityHook:
db bytes
unregisterSymbol(injNoVisabilityHook)
{
//// Injection Point: mgsvtpp.exe+12C7580 - 00000001412C7580
//// AOB address: 00000001412C7580 - mgsvtpp.exe+12C7580
//// Process: mgsvtpp.exe - 0000000140000000
//// Module: mgsvtpp.exe - 0000000140000000
//// Module Size: 000000000E1BB000
mgsvtpp.exe+12C756C: CC - int 3
mgsvtpp.exe+12C756D: CC - int 3
mgsvtpp.exe+12C756E: CC - int 3
mgsvtpp.exe+12C756F: CC - int 3
mgsvtpp.exe+12C7570: CC - int 3
mgsvtpp.exe+12C7571: CC - int 3
mgsvtpp.exe+12C7572: CC - int 3
mgsvtpp.exe+12C7573: CC - int 3
mgsvtpp.exe+12C7574: CC - int 3
mgsvtpp.exe+12C7575: CC - int 3
mgsvtpp.exe+12C7576: CC - int 3
mgsvtpp.exe+12C7577: CC - int 3
mgsvtpp.exe+12C7578: CC - int 3
mgsvtpp.exe+12C7579: CC - int 3
mgsvtpp.exe+12C757A: CC - int 3
mgsvtpp.exe+12C757B: CC - int 3
mgsvtpp.exe+12C757C: CC - int 3
mgsvtpp.exe+12C757D: CC - int 3
mgsvtpp.exe+12C757E: CC - int 3
mgsvtpp.exe+12C757F: CC - int 3
//// INJECTING START ----------------------------------------------------------
mgsvtpp.exe+12C7580: 48 8B C4 - mov rax,rsp <<<--- AOB Starts Here
//// INJECTING END ----------------------------------------------------------
mgsvtpp.exe+12C7583: 48 89 58 10 - mov [rax+10],rbx
mgsvtpp.exe+12C7587: 48 89 70 18 - mov [rax+18],rsi
mgsvtpp.exe+12C758B: 48 89 78 20 - mov [rax+20],rdi
mgsvtpp.exe+12C758F: 55 - push rbp
mgsvtpp.exe+12C7590: 41 54 - push r12
mgsvtpp.exe+12C7592: 41 55 - push r13
mgsvtpp.exe+12C7594: 41 56 - push r14
mgsvtpp.exe+12C7596: 41 57 - push r15
mgsvtpp.exe+12C7598: 48 8D A8 48FEFFFF - lea rbp,[rax-000001B8]
mgsvtpp.exe+12C759F: 48 81 EC 90020000 - sub rsp,00000290
mgsvtpp.exe+12C75A6: 0F29 70 C8 - movaps [rax-38],xmm6
mgsvtpp.exe+12C75AA: 0F29 78 B8 - movaps [rax-48],xmm7
mgsvtpp.exe+12C75AE: 44 0F29 40 A8 - movaps [rax-58],xmm8
mgsvtpp.exe+12C75B3: 44 0F29 48 98 - movaps [rax-68],xmm9
mgsvtpp.exe+12C75B8: 44 0F29 50 88 - movaps [rax-78],xmm10
mgsvtpp.exe+12C75BD: 44 0F29 98 78FFFFFF - movaps [rax-00000088],xmm11
mgsvtpp.exe+12C75C5: 44 0F29 A0 68FFFFFF - movaps [rax-00000098],xmm12
mgsvtpp.exe+12C75CD: 44 0F29 A8 58FFFFFF - movaps [rax-000000A8],xmm13
mgsvtpp.exe+12C75D5: 44 0F29 B0 48FFFFFF - movaps [rax-000000B8],xmm14
mgsvtpp.exe+12C75DD: 44 0F29 B8 38FFFFFF - movaps [rax-000000C8],xmm15
//// Template: I2CEA_AOBInjection
//// Generated with: I2 Cheat Engine Auto Assembler Script Template Generator
//// Code Happy, Code Freely, Be Awesome.
}
And so far I just get crashes everywhere else I try, but there is a different read area when spotted so I'm trying there as well.
Thanks for looking into that at least, Tim!
If users were just looking for a quick fix for avoiding alert when detected by sound even if invisibility hook is enabled , I know that enabling both the "invisibility hook" and "baby chicken hat hook" simultaneously causes the enemies to laugh at you rather than triggering an alert if you are audio detected even if you aren't spotted. I realize that's probably not in the spirit of the original request though.
-
SunBeam
- Administration

- Posts: 3100
- Joined: Sun Feb 04, 2018 7:16 pm
- Reputation: 1514
Post
by SunBeam » Fri Feb 01, 2019 12:11 am
Will look into it

-
Arvinder
- What is cheating?

- Posts: 2
- Joined: Sat Feb 02, 2019 9:01 am
- Reputation: 0
Post
by Arvinder » Sat Feb 02, 2019 9:05 am
Instant deployment and development are not working. I want to develop level 7 weapons and security devices and this option is not working. Am I doing something wrong are am I misunderstanding these options/hacks. Can anybody clarify?
-
TheyCallMeTim13
- Administration

- Posts: 1626
- Joined: Fri Mar 03, 2017 12:31 am
- Reputation: 597
Post
by TheyCallMeTim13 » Sat Feb 02, 2019 1:21 pm
Arvinder wrote: ↑Sat Feb 02, 2019 9:05 am
Instant deployment and development are not working. I want to develop level 7 weapons and security devices and this option is not working. Am I doing something wrong are am I misunderstanding these options/hacks. Can anybody clarify?
Note the timers value, turn off your computer and keep tracking the timer; you'll notice when you sign back in later that the timer was still running when your computer was off, it's because the timer isn't on your computer. Level 7 and up gear is online only, you'll notice that you can only access this stuff while signed in.
And I have a feeling your ignoring the world icon for the deployment as well; which tells you that you have to be signed in to accesses those features, because there server side.
-
Arvinder
- What is cheating?

- Posts: 2
- Joined: Sat Feb 02, 2019 9:01 am
- Reputation: 0
Post
by Arvinder » Sat Feb 02, 2019 3:06 pm
Thk u man for clarification. Yes I was ignoring it hoping that deployments colored as blue (not yellow) could not be server side. But I mean fck hell man whats the logic of development time of 7 - 10 days. They could have reduced it in later updates, they seem to be increase it with each level. Sorry off topic but could not stop myself from ranting at the dev's. There is more talent active on this site than dev's. Fck them...
-
smashbro596
- Cheater

- Posts: 45
- Joined: Fri Apr 14, 2017 6:20 pm
- Reputation: 6
Post
by smashbro596 » Fri Feb 08, 2019 6:12 am
So a bit of a question:
does the vehicle health cheat work for d-walker? if not, then can we get a cheat option for d-walker health?
-
Kieranoski
- What is cheating?

- Posts: 1
- Joined: Wed Feb 13, 2019 3:22 pm
- Reputation: 0
Post
by Kieranoski » Wed Feb 13, 2019 3:23 pm
Is there a version of this table for 1.10?
-
TheyCallMeTim13
- Administration

- Posts: 1626
- Joined: Fri Mar 03, 2017 12:31 am
- Reputation: 597
Post
by TheyCallMeTim13 » Wed Feb 13, 2019 8:54 pm
Kieranoski wrote: ↑Wed Feb 13, 2019 3:23 pm
Is there a version of this table for 1.10?
No, Mine only goes back to file version "1.0.12.0". You can check the first post for the original topic that has some older tables on it.
-
sonpro1997
- What is cheating?

- Posts: 2
- Joined: Tue Nov 20, 2018 3:53 am
- Reputation: 1
Post
by sonpro1997 » Sat Feb 16, 2019 5:42 am
For the Staff Hook, I am having difficulty trying to edit the stats of the staff.
I tried to follow the instruction in page 34.
I selected Staff Hook > Selected Staff Member Stats (w/ the correct view as shown in picture in page 34) but when I tried to change "Peak Rank" to "S" or "S++", CE just give a windows that said "S++ cannot be parsed".
Is there any step that I am doing wrong?
Just wanted to max out the unit levels so I can develop all the weapons.
Edit: Nvm I found the options, I was a goddamn Baboon. For those who is also looking for the option to edit staff, there is a drop down menu in each of the edit field.
-
TheyCallMeTim13
- Administration

- Posts: 1626
- Joined: Fri Mar 03, 2017 12:31 am
- Reputation: 597
Post
by TheyCallMeTim13 » Sat Feb 16, 2019 6:46 am
sonpro1997 wrote: ↑Sat Feb 16, 2019 5:42 am
For the Staff Hook, I am having difficulty trying to edit the stats of the staff.
I tried to follow the instruction in page 34.
I selected Staff Hook > Selected Staff Member Stats (w/ the correct view as shown in picture in page 34) but when I tried to change "Peak Rank" to "S" or "S++", CE just give a windows that said "S++ cannot be parsed".
Is there any step that I am doing wrong?
Just wanted to max out the unit levels so I can develop all the weapons.
Edit: Nvm I found the options, I was a goddamn Baboon. For those who is also looking for the option to edit staff, there is a drop down menu in each of the edit field.
Basically it still requires the numerical value, but CE has a feature for the dropdown to simplify it.
-
Vyhll
- What is cheating?

- Posts: 1
- Joined: Fri Feb 22, 2019 6:27 pm
- Reputation: 0
Post
by Vyhll » Fri Feb 22, 2019 6:28 pm
Sorry for asking if it was inherently obvious, but does the table still work the latest version of the game?
Edit: Missed the word version.
-
TheyCallMeTim13
- Administration

- Posts: 1626
- Joined: Fri Mar 03, 2017 12:31 am
- Reputation: 597
Post
by TheyCallMeTim13 » Fri Feb 22, 2019 9:46 pm
Vyhll wrote: ↑Fri Feb 22, 2019 6:28 pm
Sorry for asking if it was inherently obvious, but does the table still work the latest version of the game?
Edit: Missed the word version.
TheyCallMeTim13 wrote: ↑Sun Feb 11, 2018 8:13 pm
...
Game Vendor: Steam
Game Version: 1.15
...
Game File Version: 1.0.15.0
-
indlagrr
- What is cheating?

- Posts: 2
- Joined: Sat Mar 02, 2019 5:20 pm
- Reputation: 0
Post
by indlagrr » Sat Mar 02, 2019 6:02 pm
Sorry for asking but is there anybody teach me how to use staff writer? It seems save current staff status is woking, because I successfully made "MyStaffArry-MGSV-1~4". but about load staff, it doesn't work as I thought. when I select load file, then click yes at popup. it doesn't bring me back dismissed or died staffs. it always same. please help me.
-
TheyCallMeTim13
- Administration

- Posts: 1626
- Joined: Fri Mar 03, 2017 12:31 am
- Reputation: 597
Post
by TheyCallMeTim13 » Sat Mar 02, 2019 10:17 pm
indlagrr wrote: ↑Sat Mar 02, 2019 6:02 pm
Sorry for asking but is there anybody teach me how to use staff writer? It seems save current staff status is woking, because I successfully made "MyStaffArry-MGSV-1~4". but about load staff, it doesn't work as I thought. when I select load file, then click yes at popup. it doesn't bring me back dismissed or died staffs. it always same. please help me.
Have you actually checked, the counts don't constantly update and it doesn't remove people from the brig or med bay. But you'll have the same people. I just dismissed my entire staff then loaded them back with the "Load Staff Members from File", to force it to show the changes auto-assign all staff members.
You can try these too, just backup yours first; you'll be able to tell with this staff for sure.
-
indlagrr
- What is cheating?

- Posts: 2
- Joined: Sat Mar 02, 2019 5:20 pm
- Reputation: 0
Post
by indlagrr » Sun Mar 03, 2019 5:39 am
TheyCallMeTim13 wrote: ↑Sat Mar 02, 2019 10:17 pm
indlagrr wrote: ↑Sat Mar 02, 2019 6:02 pm
Sorry for asking but is there anybody teach me how to use staff writer? It seems save current staff status is woking, because I successfully made "MyStaffArry-MGSV-1~4". but about load staff, it doesn't work as I thought. when I select load file, then click yes at popup. it doesn't bring me back dismissed or died staffs. it always same. please help me.
Have you actually checked, the counts don't constantly update and it doesn't remove people from the brig or med bay. But you'll have the same people. I just dismissed my entire staff then loaded them back with the "Load Staff Members from File", to force it to show the changes auto-assign all staff members.
You can try these too, just backup yours first; you'll be able to tell with this staff for sure.
MGSVTPP-StaffArray.7z
Thanks for reply. I tried your file. but not working. I had 1300 staff, but I dismissed around 300 people. and test mine and yours in ACC's iDROID. not working both. staff number and level not changed. auto-assign all staff also not working. then I move to open world or motherbase. and nothing changed. If you have no problem, definitely I've done it something wrong way. but I don't know what it is..