Clair Obscur: Expedition 33

[dead_frame]

But there's a picto that removes the 9999 Damage Limit, right? Why simply not using it?

Because it would be nice to get it before that picto since ull be doing 9999 damage for a while.
anyways i see u got lv 165, does that mean that the Base stats keep going up too?? not talking about the bonus stats

The maximum legit level is 99. The base stats will stop going up on Level 99, anything higher than this will only give you more Lumina and Attribute Points, and that's the reason i changed the level to 165.

The maximum Weapon/Pictos Level seem to be Level 30, i did a save edit, which is extremely risky if you plan on editing more than one Weapon/Picto, again, the stats will stop going up at level 30.

Is there any way to raise the level to 165 except to modify the json file?

How to use this cheat table?

1. Install Cheat Engine
2. Double-click the .CT file in order to open it.
3. Click the PC icon in Cheat Engine in order to select the game process.
4. Keep the list.
5. Activate the trainer options by checking boxes or setting values from 0 to 1

[XileRain]

Strangely enough, I've found that trying to use speed hack causes the game to glitch out and have long 5 second pauses, then suddenly be playable for 1 second, then another 5 second pause. Any work around for this? I use speed hack for almost all of my single player games.

same for oblivion remastered. UE is shit in this regard. Make the pc work full time and gets wrecked during speed hack.

Ok well now it's just weird. As we know, If we hit speedhack, it glitches out and becomes all stuttery, so I alt tab to unfocus the game and go to task manager.... And now I can speed hack all I want while it's unfocused and it has no issues at all.
Wat.
I can just keep holding down the button and it works until i focus back into the game.

Even if I lower my graphics to the lowest possible and set my .exe to high priority (I tried realtime, it crashed my whole pc lol), it still won't work.

It's just annoying me now at this point lol.

[Jagabong]

Because it would be nice to get it before that picto since ull be doing 9999 damage for a while.
anyways i see u got lv 165, does that mean that the Base stats keep going up too?? not talking about the bonus stats

The maximum legit level is 99. The base stats will stop going up on Level 99, anything higher than this will only give you more Lumina and Attribute Points, and that's the reason i changed the level to 165.

The maximum Weapon/Pictos Level seem to be Level 30, i did a save edit, which is extremely risky if you plan on editing more than one Weapon/Picto, again, the stats will stop going up at level 30.

Is there any way to raise the level to 165 except to modify the json file?

Yes!

If you change characters level the stat points don't reset. Level 165 is what you need so all stats stay 99 (5 stats at 99 is 495. 495 divided by 3 points per level is 165) in memory characters level is 4 bytes before experience

[userLand980]

^ Sorry guys, can't reproduce this issue, i've tried with my saves, i also downloaded different saves from Nexus (NG+/Endgame Saves mostly), also no issues.

I really don't know what's going on.

First of all, thank you for the awesome guide. It's really fun tinkering pictos level.
Now regarding the issue, i was told that updating uesave to the latest repository commit supposed to fix the issue. I'm not savvy enough to do that, would you mind tell me on how to do that?

[jonaaa]

^ I'm not using the "latest commit" version and I have no issues so I can't help you with that. Sorry. I noticed your error are different, it's like you installed the uesave differently, did you install the uesave with the PowerShell method?

[userLand980]

^ I'm not using the "latest commit" version and I have no issues so I can't help you with that. Sorry. I noticed your error are different, it's like you installed the uesave differently, did you install the uesave with the PowerShell method?

I installed it with installer (.msi). This is really strange issue though. I decided to continue playing for a while, and now i can edit the save again. Not really sure of what causing the issue. Anyway, thanks for your help.

[sfwbest]

I tested the auto-block and auto-dodge mechanics. While they function properly, there are no corresponding in-game animations or visual cues to reflect these actions.

[J3r3k]

Has anyone requested a code to edit party?
No spoilers, it’s just to have certain characters at certain moments of the story when they are not, ahem, available.

[Prothean76]

The maximum legit level is 99. The base stats will stop going up on Level 99, anything higher than this will only give you more Lumina and Attribute Points, and that's the reason i changed the level to 165.

The maximum Weapon/Pictos Level seem to be Level 30, i did a save edit, which is extremely risky if you plan on editing more than one Weapon/Picto, again, the stats will stop going up at level 30.

...

May I ask you how to edit picto level? Or if it is possible to add to the CE table? I find their leveling sooooo slow and very rare.

I changed the Picto/Weapon level with save editing, let me give you a warning, doing this can cause issues and it's risky if you're not careful, my recommendation is to only level up the weapon/picto you're most interested, you can mass edit all your pictos/weapons like i did, but there's a high risk of 'corrupting' your save.

First, [Link], backup your save then, inside your save folder, type this command:

Code: Select all

uesave to-json -i EXPEDITION_0.sav -o EXPEDITION_0.json

If everything goes well, you'll have a json file of your save, open it with anything you want, Notepad++, VSCode, Dadroit JSON Viewer, it's up to you.

I'll be using VSCode for now. Inside your json, search for WeaponProgressions_0, from now on, you know what to do:



The max level seem to be 32 or 33 if i'm not mistaken, after doing the changes, save your json and run the command again but to 'repack' back to .sav:

Code: Select all

uesave from-json -i EXPEDITION_0.json -o EXPEDITION_0.sav

Then you're done. Open the game and check if your changes are there. Hopefully someone will implement this to a CT because it's painful to manually edit the levels like this, it's also risky.

Can i add a weapon using this method ? i missed the weapon for Maelee Medalum. And if it is possible, how can i do it ?
Thanks

[dead_frame]

May I ask you how to edit picto level? Or if it is possible to add to the CE table? I find their leveling sooooo slow and very rare.

I changed the Picto/Weapon level with save editing, let me give you a warning, doing this can cause issues and it's risky if you're not careful, my recommendation is to only level up the weapon/picto you're most interested, you can mass edit all your pictos/weapons like i did, but there's a high risk of 'corrupting' your save.

First, [Link], backup your save then, inside your save folder, type this command:

Code: Select all

uesave to-json -i EXPEDITION_0.sav -o EXPEDITION_0.json

If everything goes well, you'll have a json file of your save, open it with anything you want, Notepad++, VSCode, Dadroit JSON Viewer, it's up to you.

I'll be using VSCode for now. Inside your json, search for WeaponProgressions_0, from now on, you know what to do:



The max level seem to be 32 or 33 if i'm not mistaken, after doing the changes, save your json and run the command again but to 'repack' back to .sav:

Code: Select all

uesave from-json -i EXPEDITION_0.json -o EXPEDITION_0.sav

Then you're done. Open the game and check if your changes are there. Hopefully someone will implement this to a CT because it's painful to manually edit the levels like this, it's also risky.

Can i add a weapon using this method ? i missed the weapon for Maelee Medalum. And if it is possible, how can i do it ?
Thanks

It's possible. After searching Noahram like above


Enter it like a drag part
After correcting like this, search for Noahram again.



If you do it like the drag part shown in the image, it will be added to 33 levels.

[daovip96]

Use this uesave.exe and replace it in your install folder if got rust error

[jonaaa]

^ For those who want to compile themselves to fix this issue, whatever this issue is, just install rust, run the cargo install command you can find on GitHub and you're done, it will compile and install the "latest commit" uesave.

If you already have it installed, add the --force argument.

[cheatenginedead]

Is stealth possible?

[dead_frame]

is there a way to level up pictos or get them dropped ? theyre still on level 1 the ones that I use

Only with save editing, I posted a tutorial on page 12.

When I try to work with a save file for game pass, it comes out like this.

If you add .sav separately, it's the same result.

I think there is an error if I save it in the outside field.

[Cnutface]

I posted how to edit gamepass saves. It won't work if you use the string of numbers and letters. You have to explicitly rename it to Expedition_0.sav then use the save converter to json. Then once edited you save it, then rename the save back to its original string.

May I ask you how to edit picto level? Or if it is possible to add to the CE table? I find their leveling sooooo slow and very rare.

I changed the Picto/Weapon level with save editing, let me give you a warning, doing this can cause issues and it's risky if you're not careful, my recommendation is to only level up the weapon/picto you're most interested, you can mass edit all your pictos/weapons like i did, but there's a high risk of 'corrupting' your save.

First, [Link], backup your save then, inside your save folder, type this command:

Code: Select all

uesave to-json -i EXPEDITION_0.sav -o EXPEDITION_0.json

If everything goes well, you'll have a json file of your save, open it with anything you want, Notepad++, VSCode, Dadroit JSON Viewer, it's up to you.

I'll be using VSCode for now. Inside your json, search for WeaponProgressions_0, from now on, you know what to do:



The max level seem to be 32 or 33 if i'm not mistaken, after doing the changes, save your json and run the command again but to 'repack' back to .sav:

Code: Select all

uesave from-json -i EXPEDITION_0.json -o EXPEDITION_0.sav

Then you're done. Open the game and check if your changes are there. Hopefully someone will implement this to a CT because it's painful to manually edit the levels like this, it's also risky.

Worked perfectly for gamepass.
Change gamepass name to Expedition_0.sav
Follow the above instructions.
Then I found the WeaponProgression part and selected all the way down from weapons to pictos.
Opened a new Notepad++ file and pasted all the copied information.
Did a find and replace on all "Int": 1 to "Int": 32 (Only works if your weapons and picto are 1
Then pasted all the stuff I copied back into the file.
Saved, then did the process to turn it back to .sav then from there renamed it back to the Gamepass name and I have all weapons and pictos at 32.

Max level is 33 but I just wanted to be safer.