Remnant II - Steam (v5.2.1 - v417 & v432 & v444)

[Paul44]

^@ AshenAF92: what i think your confusion was, is that all your fragments already had level 5 or higher. That red button picks up the minimum_level value (found in that greyed 'pointerlist' ~ as explained in readme ), and sets all fragments with level BELOW that minimum to '5'...
Iow if you want them set instantly to '31', that minimum value should first be set to '31' (and then run the red_button).
Just an fyi: you will not see this "way of working" as a common feature in CE tables; but i use it a lot in my tables...

ps: i vaguely recall that the level set, does not seem to correspond with what is showing onscreen. Eg Mod Damage will show +14, but the table_entry will have '20'. Iow you might need to fill in a higher value then '31' in order to get that +31... !

How to use this cheat table?

1. Install Cheat Engine
2. Double-click the .CT file in order to open it.
3. Click the PC icon in Cheat Engine in order to select the game process.
4. Keep the list.
5. Activate the trainer options by checking boxes or setting values from 0 to 1

[AshenAF92]

@Paul44 That's pretty much what was confusing me. Thanks, I understand now

[John_Wick]

Hey Guys. Just a quick question. Would it be possible to also Change values on an existing and fully lvled prism? Have a few that are on 51+legendary and would just like to "Low Mod (lvl 50 on each Fusion)" the stats and Change the legendary aspect on it. Pretty new to all this so would be much appreciated if someone could at least tell me the necessary steps for it. Or is this even based on the Tutorial in this topic? From my understanding the Tutorial was for changing IDs on a prism.

[jonaaa]

Hey Guys. Just a quick question. Would it be possible to also Change values on an existing and fully lvled prism? Have a few that are on 51+legendary and would just like to "Low Mod (lvl 50 on each Fusion)" the stats and Change the legendary aspect on it. Pretty new to all this so would be much appreciated if someone could at least tell me the necessary steps for it. Or is this even based on the Tutorial in this topic? From my understanding the Tutorial was for changing IDs on a prism.

You MUST find the specific Fusion/Prism level or you won't go anywhere. Since we're doing everything manually, you MUST have the current level values of your prisms.

You can create a separate save and get the IDs of the prisms you're using on your main character then find the level like this, if you search the ID, you can also find the level, very close to the ID, also, you don't need to search for all your prisms level, just find at least one and use the memory view to change the other ones since they're close to each other.

Or, just fully reset your prism, they released a patch that allows you to reset the prism at level 10.

[John_Wick]

Hey Guys. Just a quick question. Would it be possible to also Change values on an existing and fully lvled prism? Have a few that are on 51+legendary and would just like to "Low Mod (lvl 50 on each Fusion)" the stats and Change the legendary aspect on it. Pretty new to all this so would be much appreciated if someone could at least tell me the necessary steps for it. Or is this even based on the Tutorial in this topic? From my understanding the Tutorial was for changing IDs on a prism.

You MUST find the specific Fusion/Prism level or you won't go anywhere. Since we're doing everything manually, you MUST have the current level values of your prisms.

You can create a separate save and get the IDs of the prisms you're using on your main character then find the level like this, if you search the ID, you can also find the level, very close to the ID, also, you don't need to search for all your prisms level, just find at least one and use the memory view to change the other ones since they're close to each other.

Or, just fully reset your prism, they released a patch that allows you to reset the prism at level 10.

Tyvm. So far so good. I found the Adress and was also able to Change the lvl on it but the % didnt increase. The Mod was lvl 100 but still only 10%

[jonaaa]

Hey Guys. Just a quick question. Would it be possible to also Change values on an existing and fully lvled prism? Have a few that are on 51+legendary and would just like to "Low Mod (lvl 50 on each Fusion)" the stats and Change the legendary aspect on it. Pretty new to all this so would be much appreciated if someone could at least tell me the necessary steps for it. Or is this even based on the Tutorial in this topic? From my understanding the Tutorial was for changing IDs on a prism.

You MUST find the specific Fusion/Prism level or you won't go anywhere. Since we're doing everything manually, you MUST have the current level values of your prisms.

You can create a separate save and get the IDs of the prisms you're using on your main character then find the level like this, if you search the ID, you can also find the level, very close to the ID, also, you don't need to search for all your prisms level, just find at least one and use the memory view to change the other ones since they're close to each other.

Or, just fully reset your prism, they released a patch that allows you to reset the prism at level 10.

Tyvm. So far so good. I found the Adress and was also able to Change the lvl on it but the % didnt increase. The Mod was lvl 100 but still only 10%

It only works with FUSIONS, only FUSIONS.

[John_Wick]

You MUST find the specific Fusion/Prism level or you won't go anywhere. Since we're doing everything manually, you MUST have the current level values of your prisms.

You can create a separate save and get the IDs of the prisms you're using on your main character then find the level like this, if you search the ID, you can also find the level, very close to the ID, also, you don't need to search for all your prisms level, just find at least one and use the memory view to change the other ones since they're close to each other.

Or, just fully reset your prism, they released a patch that allows you to reset the prism at level 10.

Tyvm. So far so good. I found the Adress and was also able to Change the lvl on it but the % didnt increase. The Mod was lvl 100 but still only 10%

It only works with FUSIONS, only FUSIONS.

Oh man i'm sorry got it tyvm

[ilicio]

~~snip~~

Hi, I'm been trying to find a way to edit the prisms, where do you swap the "IDs" and are the changes permanent?

sorry for the annoyance.

First you need to find the correct prism level and i presume you already know how to do that. By level i mean, you FIRST need to find the PRISM with CE, level it up and keep searching until you get the correct value of its level.

how to find the correct prism level? Thanks

[jonaaa]

^ By manual search. Search for level 1 then level it up, search 2, search 3 after leveling up until you get the correct value. It's the same with fusions.

[ilicio]

^ By manual search. Search for level 1 then level it up, search 2, search 3 after leveling up until you get the correct value. It's the same with fusions.

But is the prism the big one in the center of the menu or the ones created after leveling up the central prism?

[ilicio]

^ By manual search. Search for level 1 then level it up, search 2, search 3 after leveling up until you get the correct value. It's the same with fusions.

If you could send a print, I would appreciate it.

[jonaaa]

Made a video for those who are facing issues, brand new character.

[ilicio]

Made a video for those who are facing issues, brand new character.

Thanks guy, i do now!

[ilicio]

^ By manual search. Search for level 1 then level it up, search 2, search 3 after leveling up until you get the correct value. It's the same with fusions.

Do you know where you can get the table to add experience instantly?

[Paul44]

Just a teaser: [ [Link] ]...
I expect no major issues, so should be available sometime this weekend.