HELLDIVERS 2

[Featherine]

This isn't really helpful to you, but I just want to add that I was running this earlier; like 3 hours ago, and it was working fine without issue.. so while I'm not saying you are doing something wrong, it does seem to be on your end, at the very least

And how about now, can you run it now? I never used the table until an hour ago so maybe between 3 hours ago and now something happened?
It could totally be on my end but, the Memory Viewer works then right before the game launches it doesn't, so unless I have to do something extra that was never explained anywhere, I'm not sure what could be going wrong.

How to use this cheat table?

1. Install Cheat Engine
2. Double-click the .CT file in order to open it.
3. Click the PC icon in Cheat Engine in order to select the game process.
4. Keep the list.
5. Activate the trainer options by checking boxes or setting values from 0 to 1

[Cornutz]

This isn't really helpful to you, but I just want to add that I was running this earlier; like 3 hours ago, and it was working fine without issue.. so while I'm not saying you are doing something wrong, it does seem to be on your end, at the very least

And how about now, can you run it now? I never used the table until an hour ago so maybe between 3 hours ago and now something happened?
It could totally be on my end but, the Memory Viewer works then right before the game launches it doesn't, so unless I have to do something extra that was never explained anywhere, I'm not sure what could be going wrong.

In my case it only works if i use system informer to suspend helldivers2.exe right when the black screen appears, launch CE, open table, helldivers2.exe auto attached, activate table, close CE, resume helldiver2.exe, in that order, I'm good to go. I haven't crashed nor have i been kicked and i just now played for 3 hours without issue. If i try to have CE opened before launching helldivers the table will not activate. Good luck.

[Featherine]

In my case it only works if i use system informer to suspend helldivers2.exe right when the black screen appears, launch CE, open table, helldivers2.exe auto attached, activate table, close CE, resume helldiver2.exe, in that order, I'm good to go. I haven't crashed nor have i been kicked and i just now played for 3 hours without issue. If i try to have CE opened before launching helldivers the table will not activate. Good luck.

Sadly in my case the Memory Viewer breaks into ?????? as the anti-cheat is loading, right before the game launches. I'll try your method.

EDIT: Nope, sadly mine says "Error" instead of auto-attaching helldivers2.exe when I run the table after suspending the process on the first black screen while trying your way.

[Slayheim]

anyone else's Quasar laser just get stuck overheated?

same here, i don't knw what's causing it.. i did add a code somewhere on this thread and it works but you can't instantly spam it though as it will deal no dmg on the 2nd shot, need to give it a delay for like 2-3 seconds before charging another shot

[VladossX]

What about the new two stratagems? Is it possible to add them to the stratagem selection menu when selecting a mission?

[Darkz101]

...

Why are u leaking cfemen weapon editing and his bypass!???

[XxDarkus101Xx]

You think you can make instant charge for the sickle? Really hate that little delay before shooting

[Fahrenheit]

if you change anything in the table you have to save the table if you wanna keep these changes...
( top left corner click on File > Save / Save as )

Thank you. Looks like I didn't have the latest table as mine didn't have that Instant Mission option.

Maybe you want to delete the code for bases and hives to get less XP.

I have no clue about how to do that. I never messed in depth with CT stuff & table editing, and all of this programming knowledge is light years away from my understanding.

I see this in the table:

Spoiler

aobscanmodule(missionA,game.dll,45 8B 8A D8 87 00 00 48 8D 8F 1C 01 00 00) // should be unique
alloc(missionA_newmem,$1000)

label(missionA_code)
label(missionA_return)

missionA_newmem:
mov [r10+000087D8],#1

missionA_code:
mov r9d,[r10+000087D8]
lea rcx,[rdi+0000011C]
jmp missionA_return

missionA:
jmp far missionA_newmem
missionA_return:

From what you said above, does this mean I can delete the 4 lines with "missionA_code" to remove XP from mission completion...?

[DingXiang233]

May I ask how to find the weapon ID? 373 weapons, I don't know what they correspond to

[Yanoto]

May I ask how to find the weapon ID? 373 weapons, I don't know what they correspond to

Same, pls.

[Day7]

And how about now, can you run it now? I never used the table until an hour ago so maybe between 3 hours ago and now something happened?
It could totally be on my end but, the Memory Viewer works then right before the game launches it doesn't, so unless I have to do something extra that was never explained anywhere, I'm not sure what could be going wrong.

I've just used it again just now and it still works

I open the cheat engine, open memory view, run the game from steam, and keep clicking on the monitor the game is running on (i have two monitors) until the table shows "this program c" and game.dll populates, then I toggle the values and close cheat engine. Everything functioned without any issue, so I'm not sure what is going on with yours.

from another forum, allegedly the ids are:

Spoiler

## Updated WeaponIds

**ASSAULT RIFLE**
48 - AR-23 Liberator
45 - AR-23P Liberator Penetrator
47 - AR-23C Liberator Concussive

**MARKSMAN RIFLE**
60 - BR-14 Adjudicator
60 - AR-20L Justice
69 - R-63 Diligence
70 - R-63CS Diligence Counter Sniper

**SUBMACHINE GUN**
27 - MP-98 Knight
33 - SMG-37 Defender

**SHOTGUN (Bullets)**
84 - SG-8 Punisher
95 - SG-8S Slugger
20 - SG-8P Punisher Plasma
113 - ARC-12 Blitzer
98 - SG-225 Breaker
97 - SG-225SP Breaker Spray&Pray
99 - SG-225BB Breaker Bugbiter
100 - SG-225NS Breaker Nailspitter
101 - SG-255IE Breaker Incendiary

**EXPLOSIVE**
120 - CB-9 Exploding Crossbow - Could be wrong
80 - JAR-5 Dominator
76 - R-36 Eruptor

**ENERGY-BASED**
288 - LAS-5 Scythe
19 - LAS-16 Sickle
20 - PLAS-1 Scorcher

**PISTOL**
24 - P-2 Peacemaker
24 - P-19 Redeemer
130 - GP-31 Grenade Pistol
289 - LAS-7 Dagger
41 - P-4 Senator

**STANDARD GRENADE** - Some of these might be wrong
198 - G-6 Frag
209 - G-12 High Explosive
199 - G-10 Incendiary

[Cornutz]

In my case it only works if i use system informer to suspend helldivers2.exe right when the black screen appears, launch CE, open table, helldivers2.exe auto attached, activate table, close CE, resume helldiver2.exe, in that order, I'm good to go. I haven't crashed nor have i been kicked and i just now played for 3 hours without issue. If i try to have CE opened before launching helldivers the table will not activate. Good luck.

Sadly in my case the Memory Viewer breaks into ?????? as the anti-cheat is loading, right before the game launches. I'll try your method.

EDIT: Nope, sadly mine says "Error" instead of auto-attaching helldivers2.exe when I run the table after suspending the process on the first black screen while trying your way.

I'm not 100 percent sure how i fixed it but i had that issue after the last HD2 update. It's the auto attach that was broken. I'm sure you already removed the auto attach settings, tried manual attach HD2 process which will not allow you to use the table but will freeze CE, force close CE, open CE and redo the auto attach. I don't use the memory viewer or the steps in zoddel. I had to figure out my own solution because i couldn't get helldiver2.exe process to attach and than the table wouldn't work after i got the damn process to attach. Took me awhile to get mine to work. Also i don't use anything on the zoddel table other than basic scrips. I did move other advance scrips to basic and changed the group settings to activate all children so i check mark one box and close out CE manually. Again it was my problem and unique issue, i couldn't find anyone with the same situation but rather multiple people with somewhat same issues.

[DingXiang233]

And how about now, can you run it now? I never used the table until an hour ago so maybe between 3 hours ago and now something happened?
It could totally be on my end but, the Memory Viewer works then right before the game launches it doesn't, so unless I have to do something extra that was never explained anywhere, I'm not sure what could be going wrong.

I've just used it again just now and it still works

I open the cheat engine, open memory view, run the game from steam, and keep clicking on the monitor the game is running on (i have two monitors) until the table shows "this program c" and game.dll populates, then I toggle the values and close cheat engine. Everything functioned without any issue, so I'm not sure what is going on with yours.

from another forum, allegedly the ids are:

Spoiler

## Updated WeaponIds

**ASSAULT RIFLE**
48 - AR-23 Liberator
45 - AR-23P Liberator Penetrator
47 - AR-23C Liberator Concussive

**MARKSMAN RIFLE**
60 - BR-14 Adjudicator
60 - AR-20L Justice
69 - R-63 Diligence
70 - R-63CS Diligence Counter Sniper

**SUBMACHINE GUN**
27 - MP-98 Knight
33 - SMG-37 Defender

**SHOTGUN (Bullets)**
84 - SG-8 Punisher
95 - SG-8S Slugger
20 - SG-8P Punisher Plasma
113 - ARC-12 Blitzer
98 - SG-225 Breaker
97 - SG-225SP Breaker Spray&Pray
99 - SG-225BB Breaker Bugbiter
100 - SG-225NS Breaker Nailspitter
101 - SG-255IE Breaker Incendiary

**EXPLOSIVE**
120 - CB-9 Exploding Crossbow - Could be wrong
80 - JAR-5 Dominator
76 - R-36 Eruptor

**ENERGY-BASED**
288 - LAS-5 Scythe
19 - LAS-16 Sickle
20 - PLAS-1 Scorcher

**PISTOL**
24 - P-2 Peacemaker
24 - P-19 Redeemer
130 - GP-31 Grenade Pistol
289 - LAS-7 Dagger
41 - P-4 Senator

**STANDARD GRENADE** - Some of these might be wrong
198 - G-6 Frag
209 - G-12 High Explosive
199 - G-10 Incendiary

[Lokisonl]

My English is bad, but I modified it for you guys.
I removed the contentless part. You can select strategym in the menu or enter the numeric ID yourself.

Please note that some content will cause the game to crash
You need to modify it quickly and close Cheatengine before GameGuard reacts
or use UCE.

Hope you all have fun

Stratagem.ct

(22.43 KiB) Downloaded 254 times

!!! File is corrupted after 4.9 update

[a1084894269]

I found a terrain editor