FearLess Cheat Engine

Natsume Thx for guide, but i can`t find 1CA75C3 offset and change it. I open UnityPlayer.dll with a HxD editor.

All ok. I found, should have used "go to" function.

[/quote]
I posted this to another forums where I am more active but I will post here too, because a lot of people messaged me and asked how to do it, this is how you bypass the game's anticheat mhyprot2, you won't need csrss method, you might still get banned because of sanity checks though so keep that in mind. MAGA can copy my comment to main thread.

- make a backup of original UnityPlayer.dll (located in Genshin Impact\Genshin Impact Game folder) then open it with a hex editor (I use HxD editor)
- go to 1CA75C3 offset
- change bytes 8B 11 to 31 D2 and save it, patching done. You do this only once, now you can use this dll until next game update.

next;

- run the game, login to your world (enter that stone door)
- open Process Hacker and double click on GenshinImpact.exe
- go to Handles tab find and close mhyprot2 anticheat, after that you can close process hacker too.

now you can attach your CE without renaming it to csrss, the offset and bytes change when there is a new game update, remember that.
[/quote]

delete now or mihoyo fix !

DenerSBC wrote: ↑

Thu Nov 12, 2020 11:12 pm

I posted this to another forums where I am more active but I will post here too, because a lot of people messaged me and asked how to do it, this is how you bypass the game's anticheat mhyprot2, you won't need csrss method, you might still get banned because of sanity checks though so keep that in mind. MAGA can copy my comment to main thread.

- make a backup of original UnityPlayer.dll (located in Genshin Impact\Genshin Impact Game folder) then open it with a hex editor (I use HxD editor)
- go to 1CA75C3 offset
- change bytes 8B 11 to 31 D2 and save it, patching done. You do this only once, now you can use this dll until next game update.

next;

- run the game, login to your world (enter that stone door)
- open Process Hacker and double click on GenshinImpact.exe
- go to Handles tab find and close mhyprot2 anticheat, after that you can close process hacker too.

now you can attach your CE without renaming it to csrss, the offset and bytes change when there is a new game update, remember that.
[/quote]

delete now or mihoyo fix !
[/quote]

bro, please delete now or mihoyo fix!

Natsume wrote: ↑

Thu Nov 12, 2020 7:56 pm

taro1512 wrote: ↑

Thu Nov 12, 2020 5:30 pm

Natsume wrote: ↑

Thu Nov 12, 2020 4:41 pm

yes I am using my own private CE but it doesn't matter as long as you rename it to csrss.exe, anticheat will always detect it, I patch unityplayer.dll and then close mhyprot2 with process hacker.

can u personal teach me how to do it? i try so many time but fail to patch unityplayer.dll

ceh430 wrote: ↑

Thu Nov 12, 2020 7:20 pm

Natsume wrote: ↑

Thu Nov 12, 2020 4:41 pm

yes I am using my own private CE but it doesn't matter as long as you rename it to csrss.exe, anticheat will always detect it, I patch unityplayer.dll and then close mhyprot2 with process hacker.

are you using hex editor to change offsets in unityplayer.dll or you editing it somehow after game starts?

I posted this to another forums where I am more active but I will post here too, because a lot of people messaged me and asked how to do it, this is how you bypass the game's anticheat mhyprot2, you won't need csrss method, you might still get banned because of sanity checks though so keep that in mind. MAGA can copy my comment to main thread.

- make a backup of original UnityPlayer.dll (located in Genshin Impact\Genshin Impact Game folder) then open it with a hex editor (I use HxD editor)
- go to 1CA75C3 offset
- change bytes 8B 11 to 31 D2 and save it, patching done. You do this only once, now you can use this dll until next game update.

next;

- run the game, login to your world (enter that stone door)
- open Process Hacker and double click on GenshinImpact.exe
- go to Handles tab find and close mhyprot2 anticheat, after that you can close process hacker too.

now you can attach your CE without renaming it to csrss, the offset and bytes change when there is a new game update, remember that.

After patching unityplayer.dll and then login and go enter the stone door, this error massage pops up. Is there something wrong?

abenz wrote: ↑

Thu Nov 12, 2020 11:30 pm

Natsume wrote: ↑

Thu Nov 12, 2020 7:56 pm

taro1512 wrote: ↑

Thu Nov 12, 2020 5:30 pm

can u personal teach me how to do it? i try so many time but fail to patch unityplayer.dll

ceh430 wrote: ↑

Thu Nov 12, 2020 7:20 pm

are you using hex editor to change offsets in unityplayer.dll or you editing it somehow after game starts?

I posted this to another forums where I am more active but I will post here too, because a lot of people messaged me and asked how to do it, this is how you bypass the game's anticheat mhyprot2, you won't need csrss method, you might still get banned because of sanity checks though so keep that in mind. MAGA can copy my comment to main thread.

- make a backup of original UnityPlayer.dll (located in Genshin Impact\Genshin Impact Game folder) then open it with a hex editor (I use HxD editor)
- go to 1CA75C3 offset
- change bytes 8B 11 to 31 D2 and save it, patching done. You do this only once, now you can use this dll until next game update.

next;

- run the game, login to your world (enter that stone door)
- open Process Hacker and double click on GenshinImpact.exe
- go to Handles tab find and close mhyprot2 anticheat, after that you can close process hacker too.

now you can attach your CE without renaming it to csrss, the offset and bytes change when there is a new game update, remember that.

After patching unityplayer.dll and then login and go enter the stone door, this error massage pops up. Is there something wrong?

you used Process Hacker??
when you load the .CT??

pancho_xx wrote: ↑

Fri Nov 13, 2020 12:35 am

abenz wrote: ↑

Thu Nov 12, 2020 11:30 pm

Natsume wrote: ↑

Thu Nov 12, 2020 7:56 pm

I posted this to another forums where I am more active but I will post here too, because a lot of people messaged me and asked how to do it, this is how you bypass the game's anticheat mhyprot2, you won't need csrss method, you might still get banned because of sanity checks though so keep that in mind. MAGA can copy my comment to main thread.

- make a backup of original UnityPlayer.dll (located in Genshin Impact\Genshin Impact Game folder) then open it with a hex editor (I use HxD editor)
- go to 1CA75C3 offset
- change bytes 8B 11 to 31 D2 and save it, patching done. You do this only once, now you can use this dll until next game update.

next;

- run the game, login to your world (enter that stone door)
- open Process Hacker and double click on GenshinImpact.exe
- go to Handles tab find and close mhyprot2 anticheat, after that you can close process hacker too.

now you can attach your CE without renaming it to csrss, the offset and bytes change when there is a new game update, remember that.

After patching unityplayer.dll and then login and go enter the stone door, this error massage pops up. Is there something wrong?

you used Process Hacker??
when you load the .CT??

no, i just did Natsume steps ( - patching unityplayer.dll - run the game, login to your world (enter that stone door)) after that step, error message pops up.

you need to do:

- open Process Hacker and double click on GenshinImpact.exe
- go to Handles tab find and close mhyprot2 anticheat, after that you can close process hacker too.

pancho_xx wrote: ↑

Fri Nov 13, 2020 1:00 am

you need to do:

- open Process Hacker and double click on GenshinImpact.exe
- go to Handles tab find and close mhyprot2 anticheat, after that you can close process hacker too.

before entering world ?

abenz wrote: ↑

Fri Nov 13, 2020 1:01 am

pancho_xx wrote: ↑

Fri Nov 13, 2020 1:00 am

you need to do:

- open Process Hacker and double click on GenshinImpact.exe
- go to Handles tab find and close mhyprot2 anticheat, after that you can close process hacker too.

before entering world ?

Sorry, I was wrong, that is done after entering the server, that error gives me when I want to enter a server with a cheat activated

edit: you have discord?

Natsume wrote: ↑

Thu Nov 12, 2020 7:56 pm

taro1512 wrote: ↑

Thu Nov 12, 2020 5:30 pm

Natsume wrote: ↑

Thu Nov 12, 2020 4:41 pm

yes I am using my own private CE but it doesn't matter as long as you rename it to csrss.exe, anticheat will always detect it, I patch unityplayer.dll and then close mhyprot2 with process hacker.

can u personal teach me how to do it? i try so many time but fail to patch unityplayer.dll

ceh430 wrote: ↑

Thu Nov 12, 2020 7:20 pm

Natsume wrote: ↑

Thu Nov 12, 2020 4:41 pm

yes I am using my own private CE but it doesn't matter as long as you rename it to csrss.exe, anticheat will always detect it, I patch unityplayer.dll and then close mhyprot2 with process hacker.

are you using hex editor to change offsets in unityplayer.dll or you editing it somehow after game starts?

I posted this to another forums where I am more active but I will post here too, because a lot of people messaged me and asked how to do it, this is how you bypass the game's anticheat mhyprot2, you won't need csrss method, you might still get banned because of sanity checks though so keep that in mind. MAGA can copy my comment to main thread.

- make a backup of original UnityPlayer.dll (located in Genshin Impact\Genshin Impact Game folder) then open it with a hex editor (I use HxD editor)
- go to 1CA75C3 offset
- change bytes 8B 11 to 31 D2 and save it, patching done. You do this only once, now you can use this dll until next game update.

next;

- run the game, login to your world (enter that stone door)
- open Process Hacker and double click on GenshinImpact.exe
- go to Handles tab find and close mhyprot2 anticheat, after that you can close process hacker too.

now you can attach your CE without renaming it to csrss, the offset and bytes change when there is a new game update, remember that.

Thank u, sir

ReskyAW wrote: ↑

Thu Nov 12, 2020 11:16 pm

bro, please delete now or mihoyo fix!

mihoyo won't fix anything, this has been around for a while already, besides bypassing anti cheat doesn't mean you are safe, you will still get banned because of sanity checks in the game.

abenz wrote: ↑

Thu Nov 12, 2020 11:30 pm

After patching unityplayer.dll and then login and go enter the stone door, this error massage pops up. Is there something wrong?

you probably patched it wrong if you can login to your world with original dll, I have been playing for a few hours now without a problem.

dungng211 wrote: ↑

Fri Nov 13, 2020 1:19 am

I can't find 1CA75C3 in HxD

click Search and then click ''go to''

Natsume wrote: ↑

Fri Nov 13, 2020 1:22 am

ReskyAW wrote: ↑

Thu Nov 12, 2020 11:16 pm

bro, please delete now or mihoyo fix!

mihoyo won't fix anything, this has been around for a while already, besides bypassing anti cheat doesn't mean you are safe, you will still get banned because of sanity checks in the game.

abenz wrote: ↑

Thu Nov 12, 2020 11:30 pm

After patching unityplayer.dll and then login and go enter the stone door, this error massage pops up. Is there something wrong?

you probably patched it wrong if you can login to your world with original dll, I have been playing for a few hours now without a problem.

dungng211 wrote: ↑

Fri Nov 13, 2020 1:19 am

I can't find 1CA75C3 in HxD

click Search and then click ''go to''

i did exactly what you did and use the same tool. perhaps its because different server? are you palying in Asia or others?

abenz wrote: ↑

Fri Nov 13, 2020 1:26 am

i did exactly what you did and use the same tool. perhaps its because different server? are you palying in Asia or others?

I am playing on Europe server but don't think it is about server, if you can't see 8B 11 bytes, then your unityplayer.dll is different, reinstalling game might fix it.

Natsume wrote: ↑

Fri Nov 13, 2020 1:30 am

abenz wrote: ↑

Fri Nov 13, 2020 1:26 am

i did exactly what you did and use the same tool. perhaps its because different server? are you palying in Asia or others?

I am playing on Europe server but don't think it is about server, if you can't see 8B 11 bytes, then your unityplayer.dll is different, reinstalling game might fix it.

is this the same as you :

abenz wrote: ↑

Fri Nov 13, 2020 1:33 am

is this the same as you :

yeah, change them to 31 D2 then save the file (click save icon at the top) it will make a backup of the original automatically. start the game, login to your world, see your character, then close anticheat with process hacker as I explained.