Page 96 of 204
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:20 pm
by Kekner
nachtheuler wrote: ↑Sun Mar 10, 2024 3:09 pm
95 Pages on this Thread, can someone link how to go about using this for someone like me who just got to this post for the very first time? Theres a Load of Info on here and im not sure what currently holds up and what doesnt.
We are currently trying to make the tutorial right now! Should be up very soon now i finally have my CE working correctly.
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:26 pm
by steelbro
can anyone point me to the latest CT file or the one on the 1st page the latest?
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:31 pm
by emoisback
i use 1st page
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:32 pm
by MasterNathobi
ive supended the game but i can't tick the boxes in the table on cheat engine to enable them.
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:33 pm
by emoisback
MasterNathobi wrote: ↑Sun Mar 10, 2024 3:32 pm
ive supended the game but i can't tick the boxes in the table on cheat engine to enable them.
are you sure you suspend when 0x180000000 address changed?
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:41 pm
by MasterNathobi
emoisback wrote: ↑Sun Mar 10, 2024 3:33 pm
MasterNathobi wrote: ↑Sun Mar 10, 2024 3:32 pm
ive supended the game but i can't tick the boxes in the table on cheat engine to enable them.
are you sure you suspend when 0x180000000 address changed?
so i load memory viewer and right click, select to goto address and type in 0x180000000, the memory viewer goes there. open the game and the viewer moves and it doesnt say 0x180000000 anymore it says 140000000 in the bottom section and helldivers2.exe+3154058 at the top
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:42 pm
by Zethos
I got it working, the problem is the 0x180000000 adress, for me (and prob others as well) it will change back to range 14000000 once helldivers is starting, the adress 0x180000000 is changing a bit later, so most users will freeze the process before 0x180000000 values were changed.
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:44 pm
by MasterNathobi
Zethos wrote: ↑Sun Mar 10, 2024 3:42 pm
I got it working, the problem is the 0x180000000 adress, for me (and prob others as well) it will change back to range 14000000 once helldivers is starting, the adress 0x180000000 is changing a bit later, so most users will freeze the process before 0x180000000 values were changed.
yh so how do you fix that
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:46 pm
by emoisback
if your browse memory jump back to 14000000 go to 0x180000000 asap
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:47 pm
by Goth667
Just right click goto address 0x180000000 then right click again and got address 0x180000000 but then wait for it to jump back to 14... be4fore you press ok.
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:48 pm
by topkekpleb
Whenever I try to suspend I get "Access is Denied" from process hacker.
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:48 pm
by emoisback
Goth667 wrote: ↑Sun Mar 10, 2024 3:47 pm
Just right click goto address 0x180000000 then right click again and got address 0x180000000 but then wait for it to jump back to 14... be4fore you press ok.
nice trick
, i dont know why mine doesnt jump back to 14xxx
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:49 pm
by Zethos
The only solution I found so far is the following:
1) start memory find -> you will start at 14....
2) once you start helldivers, the 14... will become green
3) pause helldivers process
4) go to memory find and go to adress 0x180000000
5) resume helldivers process
6) wait for 0x180000000 valuables become green and pause again
7) load CE codes
8) close CE and resume process
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:51 pm
by emoisback
Zethos wrote: ↑Sun Mar 10, 2024 3:49 pm
The only solution I found so far is the following:
1) start memory find -> you will start at 14....
2) once you start helldivers, the 14... will become green
3) pause helldivers process
4) go to memory find and go to adress 0x180000000
5) resume helldivers process
6) wait for 0x180000000 valuables become green and pause again
7) load CE codes
8) close CE and resume process
for me before green its write in white first there is exacly where you need to suspend.
Re: HELLDIVERS 2
Posted: Sun Mar 10, 2024 3:51 pm
by Zethos
emoisback wrote: ↑Sun Mar 10, 2024 3:48 pm
Goth667 wrote: ↑Sun Mar 10, 2024 3:47 pm
Just right click goto address 0x180000000 then right click again and got address 0x180000000 but then wait for it to jump back to 14... be4fore you press ok.
nice trick
, i dont know why mine doesnt jump back to 14xxx
because somehow your CE is attached to the game process even before starting helldivers2 maybe? the process bar is empty before I start the game, could that be the reason? but nevertheless, thank you for sharing your trick