Thank you! Turns out I wasn't a total idiot, just something about setup was wrong. So I moved the tool to a new folder and extracted the paks directly from the game folder instead of copying those files out, and it worked.Ckeylos wrote: ↑Fri Aug 04, 2023 9:22 pmCopied from Unpacking .PAK files of Baldur's Gate 3 Steam Guide
- Download and unpack freshest release of ExportTool from [Link]
- run ConverterApp.exe
- at "Game" picklist select "Baldur's Gate 3 (64-bit)"
- select tab "PAK / LSV Tools"
- select game resources and manipulate what you want
It works fine for me. FYI there is a cap of 30 on attributes. Going over 30 does absolutely nothing. When you save and the attributes get populated, you find the slot that has the name of the character. Once you're looking at it in cheat engine DO NOTHING IN THE GAME. There's a value offset, so if the cheat table says 0, that means it's an 8 in-game. Adjust these values as you want. Be aware that the stat assigned +1/+2 you did on character creation (or the default NPCs all have) are calculated AFTER the values in cheat engine. So if I put a +2 in charisma and increase it to 17 when I make my character, my charisma is still 15, but has a +2 bonus applied afterwards. So it'll show 17 on my character sheet, it's actually 15, but it'll display as 7 in the attribute panel in cheat engine.Moomoofarmchairman wrote: ↑Fri Aug 04, 2023 7:44 pmI tried saving to populate the attribute list, it does it but changing the value does nothing, then checking any menu changes the values in CE to stupid numbers like strength goes from 17 to 5068 and doesn't save. I then try the whole thing again but using the command box to use them to increase stats and it doesn't recognize the game I guess because there's either <script> or ?? and clicking any box does nothing.
Can anyone help figure out the ability stat points not saving when I change value? / or show how to simply increase stats to moderate but not godlike levels?
new entry "MAG_Oathbreaker_Boots"BeefingtonsBay wrote: ↑Fri Aug 04, 2023 9:48 pmAnother question, anyone know of the item code for the Oathbreaker items? So far I haven't found them.
And also anyone got a list of spells?
divine.exe from this.bg3-modders-multitool.exe).divine.exe and bg3.exe by clicking the asterisk in the lower right hand corner after opening the Multitool.
Gustav.pak and Shared.pak. I recommend also unpacking English.pak as this contains the translations you see in-game.
English.loca. The line here contains a "handle" (ID). Use this handle to do a new search, and you will find the files that contain references to this handle. These files likely contains the UUID/MapKey.
ConverterApp.exe to batch convert all .lsf-files (binary) to .lsj-files (json) to make them more readable. Also use ConvertApp.exe to convert English.loca (binary) to xml.
Code: Select all
$Stopwatch = New-Object -TypeName System.Diagnostics.Stopwatch
$Stopwatch.Start()
$UnpackedDataFolder = [System.IO.FileInfo]'C:\Games\BG3-Tools\BG3-Modders-Multitool\UnpackedData'
$MyDocuments = [System.IO.FileInfo][System.Environment]::GetFolderPath('MyDocuments')
$CheatTableFolder = [System.IO.FileInfo]"$($MyDocuments.FullName)\My Cheat Tables\bg3"
$LocalizationPath = [System.IO.FileInfo]"$($UnpackedDataFolder.FullName)\English\Localization\English\english.xml"
$CsvPath = "$($CheatTableFolder)\all_templates.csv"
$LocalizationData = New-Object -TypeName System.Xml.XmlDocument
$LocalizationData.PreserveWhitespace = $true
$LocalizationData.Load($LocalizationPath.FullName)
$RootTemplateFolders = @(
"$($UnpackedDataFolder.FullName)\Shared\Public\Shared\RootTemplates"
,"$($UnpackedDataFolder.FullName)\Shared\Public\SharedDev\RootTemplates"
,"$($UnpackedDataFolder.FullName)\Gustav\Public\Gustav\RootTemplates"
,"$($UnpackedDataFolder.FullName)\Gustav\Public\GustavDev\RootTemplates"
)
$RootTemplates = Get-ChildItem -Recurse -File -Filter *.lsx -Path $RootTemplateFolders
# Empty array to contain the objects.
$Objects = @()
# Empty array to contain the attributes.
$Attributes = @()
foreach ($Template in $RootTemplates) {
$Object = [ordered]@{}
$XmlDocument = New-Object -TypeName System.Xml.XmlDocument
$XmlDocument.PreserveWhitespace = $true
$XmlDocument.Load($Template.FullName)
$Nodes = $XmlDocument.SelectNodes("//node[@id='GameObjects']")
if ($Nodes.Count -eq 0) { continue }
$Nodes.attribute | ForEach-Object {
$k = $_.id
$v = $_.value
if ($k -notin $Attributes) {
$Attributes += $k
}
$Object.Add($k, $v)
if ($_.type -eq 'TranslatedString') {
$k = "$($k)English"
$v = $_.handle
if ($k -notin $Attributes) {
$Attributes += $k
}
$Object.Add("$($k)English", $LocalizationData.SelectSingleNode("//content[@contentuid='$($v)']").'#text')
}
}
$Objects += New-Object -TypeName PSCustomObject -Property $Object
}
# All data are gathered, but we need to create a new object, where every entry contains all the same attribute/property keys, otherwise exporting to Csv apparently doesn't work very well.
# Empty array to contain the objects.
$oArray = @()
foreach ($o in $Objects) {
# Create/reset the hashtable used to all the attributes/properties.
# The ones explicitly listed, are so they are sorted first (i.e. the first columnds).
$oTable = [ordered]@{
Type = ''
MapKey = ''
ParentTemplateId = ''
Name = ''
DisplayNameEnglish = ''
}
# Sort the collected attributes and add the rest to the hashtable.
$Attributes | Sort-Object -Unique | ForEach-Object {
if ($_ -notin $oTable.Keys) {
$oTable.Add($_, '')
}
}
# Loop through all the attributes/properties.
foreach ($k in $o.psobject.Properties.Name) {
# Update the matching keys in the hashtable, with the collected value.
$oTable."$($k)" = $o."$($k)"
}
# Add the table to the array.
$oArray += New-Object -TypeName PSCustomObject -Property $oTable
}
$oArray | Export-Csv -NoTypeInformation -Force -Encoding UTF8 -Delimiter ';' -Path $CsvPath
$Stopwatch.Stop()
$Stopwatch.Elapsedtype=item found in the RootTemplates, as well as various attributes for the items, that can be used for searching/filtering.bg3_EvenLess_2023.08.19.CT.bg3_EvenLess_Scrolls_20230819T0856582171.CT.bg3_scrolls.txt.bg3_EvenLess_2023.08.18.CT.bg3_items_20230813T0228529556.txt. Removed bg3_items_20230812T2222384844.txt.bg3_EvenLess_armor_v2.CT.bg3_items_20230812T2222384844.txt.bg3_items_spells.CT table, which is based Zanzer's bg3.CT v4.1.1.3624901 (2) table.bg3_armor.CT, bg3_weapon.CT, and bg3_object.CT). They contain a LOT more items, but are not as pretty and sorted as the ones I manually added in the bg3_items_spells.CT table.bg3_armor.CT, or bg3_weapon.CT, or bg3_object.CT and merge it into Zanzer's bg3.CT.
armor.txt, weapon.txt, and armor.txt files, found in the following unpacked folders, and a list of those are added in the bg_items.txt (CSV) file:
bg3_items_v2.txt (CSV) file. This one contains all items found in the all the RootTemplates-files. This does include a lot of items that cannot be added to inventory, from the looks of it. It does not contain all files, I've discovered, but it is the most complete list so far.Code: Select all
# Get the path for the My Documents folder.
$DocumentsFolder = [System.Environment]::GetFolderPath('MyDocuments')
# The default location where Cheat Engine saves cheat tables.
$CheatTablesFolder = Join-Path -Path $DocumentsFolder -ChildPath 'My Cheat Tables'
$ItemsCsvFile = 'bg3_items.csv'
$ItemsCsvPath = Join-Path -Path $CheatTablesFolder -ChildPath $ItemsCsvFile
$ItemsCtFile = 'bg3_armor.CT'
$ItemsCtPath = Join-Path -Path $CheatTablesFolder -ChildPath $ItemsCtFile
# Base-path of the unpacked data/.pak-files.
$BasePath = 'C:\Games\BG3-Tools\UnpackedData'
# Get tools to extract with here:
# https://github.com/Norbyte/lslib/releases/latest
# https://github.com/ShinyHobo/BG3-Modders-Multitool/releases/latest
# Sub-paths to the armor, object, and weapon .txt-files.
$ArmorFiles = @(
'Shared\Public\Shared\Stats\Generated\Data\Armor.txt'
,'Shared\Public\SharedDev\Stats\Generated\Data\Armor.txt'
,'Gustav\Public\Gustav\Stats\Generated\Data\Armor.txt'
,'Gustav\Public\GustavDev\Stats\Generated\Data\Armor.txt'
)
$WeaponFiles = @(
'Shared\Public\Shared\Stats\Generated\Data\Weapon.txt'
,'Shared\Public\SharedDev\Stats\Generated\Data\Weapon.txt'
,'Gustav\Public\Gustav\Stats\Generated\Data\Weapon.txt'
,'Gustav\Public\GustavDev\Stats\Generated\Data\Weapon.txt'
)
$ObjectFiles = @(
'Shared\Public\Shared\Stats\Generated\Data\Object.txt'
,'Shared\Public\SharedDev\Stats\Generated\Data\Object.txt'
,'Gustav\Public\Gustav\Stats\Generated\Data\Object.txt'
,'Gustav\Public\GustavDev\Stats\Generated\Data\Object.txt'
)
# Combine to one.
#$Files = $ArmorFiles + $WeaponFiles + $ObjectFiles
$Files = $ArmorFiles + $WeaponFiles + $ObjectFiles
$RarityColor = @{
'RARITY_UNKNOWN' = 'C0C0C0'
'Uncommon' = '00FF00'
'Rare' = 'FFFF00'
'VeryRare' = 'FF00FF'
'Legendary' = '4080FF'
}
$CheatTableHead = @"
<?xml version="1.0" encoding="utf-8"?>
<CheatTable CheatEngineTableVersion="45">
<CheatEntries>
<CheatEntry>
<ID>@@CE_ID@@</ID>
<Description>"Item Spawner"</Description>
<Options moHideChildren="1"/>
<GroupHeader>1</GroupHeader>
<CheatEntries>
"@
$CheatTableFoot = @"
</CheatEntries>
</CheatEntry>
</CheatEntries>
<UserdefinedSymbols>
<SymbolEntry>
<Name>playerCharactersPtr</Name>
<Address>1D4526F0000</Address>
</SymbolEntry>
</UserdefinedSymbols>
<DisassemblerComments>
<DisassemblerComment>
<Address>"bg3.exe"+25C0F20</Address>
<Comment>Zanzer</Comment>
</DisassemblerComment>
</DisassemblerComments>
</CheatTable>
"@
$CheatEntryTemplate = @"
<CheatEntry>
<ID>@@CE_ID@@</ID>
<Description>"@@ITEM_NAME@@"</Description>
<Color>@@RARITY_COLOR@@</Color>
<VariableType>Auto Assembler Script</VariableType>
<AssemblerScript Async="1">[ENABLE]
{`$lua}
if syntaxcheck then return end
local uuid = "@@ITEM_UUID@@"
local cmdCall = getAddress("cmdCall")
local cmdAddr = getAddress("cmdAddr")
local cmdArgs = getAddress("cmdArgs")
local cmdStr1 = getAddress("cmdStr1")
PrepareCall("GetHostCharacter")
executeCodeEx(0, nil, cmdCall)
writePointer(cmdArgs + 0x18, readPointer(cmdArgs + 0x08))
PrepareCall("CreateAtObject")
writePointer(cmdArgs + 0x08, cmdStr1)
writeString(cmdStr1, uuid)
writeBytes(cmdStr1 + #uuid, 0)
writeQword(cmdArgs + 0x28, 0)
writeQword(cmdArgs + 0x38, 0)
writeQword(cmdArgs + 0x48, 0)
writeQword(cmdArgs + 0x58, 0)
executeCodeEx(0, nil, cmdCall)
{`$asm}
assert(true)
[DISABLE]
</AssemblerScript>
</CheatEntry>
"@
# Regular Expression to check if the UUID looks right.
$RegexUUID = [regex]'^[a-z0-9]{8}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{12}$'
# Create an empty array to store all the items.
$Items = ''
# Create an empty string variable to store the content of the files.
$Content = ''
# Loop through the files and read their contents into one big string.
foreach ($File in $Files) {
# Combine base-path and sub-path to the full path.
$FullPath = Join-Path -Path $BasePath -ChildPath $File
$Content += Get-Content -Raw -Path $FullPath
}
# Split the content string into an array of lines.
$Line = $Content -split '\n'
# Create an empty array to store the item objects in.
$Items = @()
# Ensure the Item variable is empty for the first iteration.
Clear-Variable -Name Item -ErrorAction SilentlyContinue
# Loop through all the lines.
for ($l = 0; $l -lt $Line.Count; $l++) {
# Check if the current line is the start of a new item entry.
if ($Line[$l] -match '^new entry "(?<Name>\w+)"') {
# Store the items "name" in a new variable, so it does not get overwritten by following mathes.
$ItemName = $Matches.Name
# Check if we already have an item object, and if that item object contains a valid UUID.
if ($Item -and $Item.UUID -match $RegexUUID) {
# Store the previous item object in the array.
$Items += New-Object -TypeName psobject -Property $Item
}
# Create a fresh hashtable and populate it with the default values.
$Item = [ordered]@{
Name = $ItemName
UUID = $null
Type = 'TYPE_UNKNOWN'
Rarity = 'RARITY_UNKNOWN'
}
}
else {
# Not a new item entry, so look for the current item entrys data.
# Check if the current line is the item type.
if ($Line[$l] -match 'type "(?<Type>\w+)"') {
# Update the hashtable with the found value.
$Item.Type = $Matches.Type
}
# Check if the current line is the item rarity.
if ($Line[$l] -match '^data "Rarity" "(?<Rarity>\w+)"') {
# Update the hashtable with the found value.
$Item.Rarity = $Matches.Rarity
}
# Check if the current line is the item UUID.
if ($Line[$l] -match '^data "RootTemplate" "(?<UUID>[a-f0-9-]+)"') {
# Update the hashtable with the found value.
$Item.UUID = $Matches.UUID
}
}
}
# Export the items to a the items CSV-file. Using semi-colon (;) as delimiter, simply because the CSV file will automatically be shown in colums, in spreadsheet programs.
$Items | Sort-Object -Property Name | Export-Csv -Force -NoTypeInformation -Encoding Default -Delimiter ';' -Path $ItemsCsvPath
# Build the Cheat Table.
foreach ($t in ($Items | Select-Object -ExpandProperty Type -Unique)) {
$CtFile = "bg3_$($t.ToLower()).CT"
$CtPath = Join-Path -Path $CheatTablesFolder -ChildPath $CtFile
$CheatID = 1
$CheatTableHead.Replace('@@CE_ID@@', $CheatID) | Out-File -Force -Encoding default -FilePath $CtPath
foreach ($i in ($Items | Where-Object { $_.Type -eq $t} | Sort-Object -Property Name)) {
$CheatID++
$CheatEntryTemplate.Replace('@@CE_ID@@', $CheatID).Replace('@@ITEM_NAME@@', $i.Name).Replace('@@RARITY_COLOR@@', $RarityColor."$($i.Rarity)").Replace('@@ITEM_UUID@@', $i.UUID) | Out-File -Append -Encoding default -FilePath $CtPath
}
$CheatTableFoot | Out-File -Append -Encoding default -FilePath $CtPath
}
bg3_items_v2.txt-file) took more than 14 hours to complete (14 hours, 5 minutes, 2 seconds and 404 milliseconds to be exact).ConverterApp.exe that is included in Norbyte's ExportTool.
Code: Select all
$VerbosePreference = 'SilentlyContinue'
$VerbosePreference = 'Continue'
$Stopwatch = New-Object -TypeName System.Diagnostics.Stopwatch
$Stopwatch.Start()
$DocumentsFolder = [System.Environment]::GetFolderPath('MyDocuments')
$CheatTablesFolder = Join-Path -Path $DocumentsFolder -ChildPath 'My Cheat Tables'
$CsvFile = 'bg3_allitems.csv'
$CsvPath = Join-Path -Path $CheatTablesFolder -ChildPath $CsvFile
$BasePath = 'C:\Games\BG3-Tools\UnpackedData'
$LocalizationPath = "$($BasePath)\English\Localization\English\english.xml"
$RootTemplates = @(
"$($BasePath)\Shared\Public\Shared\RootTemplates"
,"$($BasePath)\Shared\Public\SharedDev\RootTemplates"
,"$($BasePath)\Gustav\Public\Gustav\RootTemplates"
,"$($BasePath)\Gustav\Public\GustavDev\RootTemplates"
)
$LocalizationData = [xml](Get-Content -Encoding Default -Path $LocalizationPath)
$RegexUUID = [regex]'^[a-z0-9]{8}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{12}$'
function Get-TemplateData {
[CmdletBinding()]
param (
[Parameter(Mandatory = $true)]
[System.IO.FileInfo]
$Path
,
[Parameter(Mandatory = $true)]
[guid]
$Id
)
Write-Verbose -Message "Fn: Get-TemplateData -Id '$($Id)'"
$Template = Join-Path -Path $Path -ChildPath "$($Id).lsj"
$Success = $false
if (Test-Path -Path $Template) {
$Success = $true
try {
$Data = Get-Content -Raw -Encoding Default -Path $Template | ConvertFrom-Json
}
catch {
$Success = $false
}
}
if ($Success) {
return $Data.save.regions.Templates.GameObjects[0]
}
}
$Items = @()
$Files = Get-ChildItem -Path $RootTemplates -Filter *.lsj
Write-Output '"UUID";"Name";"Stats";"DisplayName";"Description"' | Out-File -Force -Encoding default -FilePath $CsvPath
foreach ($f in $Files) {
$TemplatePath = $f.Directory.FullName
$TemplateId = $f.BaseName
$Item = [ordered]@{
UUID = $f.BaseName
Name = $null
Stats = $null
DisplayName = $null
Description = $null
}
Write-Verbose -Message "L1: Read '$($f.BaseName)'."
do {
$Data = Get-TemplateData -Path $TemplatePath -Id $TemplateId
if ('Name' -notin $Data.psobject.Properties.Name) {
Write-Verbose -Message "L2: Name missing for '$($f.BaseName)'."
break
}
foreach ($p in $Data.psobject.Properties.Name) {
switch ($p) {
'Name' {
if ($null -eq $Item.Name) {
Write-Verbose -Message "L3: Adding Name '$($Data.Name.value)'."
$Item.Name = $Data.Name.value
}
}
'Stats' {
if ($null -eq $Item.Stats) {
Write-Verbose -Message "L3: Adding Stats '$($Data.Stats.value)'."
$Item.Stats = $Data.Stats.value
}
}
'DisplayName' {
if ($null -eq $Item.DisplayName) {
$LocalizedName = ($LocalizationData.contentList.content | Where-Object {
$_.contentuid -eq $Data.DisplayName.handle
}).'#text'
Write-Verbose -Message "L3: Adding DisplayName '$($LocalizedName)'."
$Item.DisplayName = $LocalizedName
}
}
'Description' {
if ($null -eq $Item.Description) {
$LocalizedName = ($LocalizationData.contentList.content | Where-Object {
$_.contentuid -eq $Data.Description.handle
}).'#text'
Write-Verbose -Message "L3: Adding Description '$($LocalizedName)'."
$Item.Description = $LocalizedName
}
}
}
}
$TemplateId = $Data.ParentTemplateId.value
} while ($Data.psobject.Properties.Name -contains 'ParentTemplateId' -and $Data.ParentTemplateId.value -match $RegexUUID)
Write-Verbose -Message "L1: Done '$($f.BaseName)'."
if ($null -eq $Item.DisplayName) {
Write-Verbose -Message "L1: DisplayName missing for '$($f.BaseName)'."
continue
}
$ItemObject = New-Object -TypeName psobject -Property $Item
$ItemObject | ConvertTo-Csv -NoTypeInformation -Delimiter ';' | Select-Object -Skip 1 | Out-File -Append -Encoding default -FilePath $CsvPath
#$Items += $ItemObject
}
#$Items | Export-Csv -Force -NoTypeInformation -Encoding Default -Delimiter ';' -Path $CsvPath
$Stopwatch.Stop()
$Stopwatch.Elapsed
Users browsing this forum: AhrefsBot, arap, Bing [Bot], delusionz, DrummerIX, EYE_31251, FisheR47, Gargrim, gir489, Google Adsense [Bot], Gryva, heonicle, ifed32, JAMIET44, KS212, Lesnichii, necropolish, Noxxx88, Scoped Evil, seinhlyanbo, Trunganhnd, wanderer1126, Wuckles, YandexBot