[REQUEST] Indiana Jones and the Great Circle

[BADORGOOD]

possible ofuscated game values?

[VampTY]

Just out of curiosity I've only gotten to the level Sukhothai but is there any point of trying to edit the currency for the Hymalayas map? Since that level doesn't contain any things to buy?

Doesn't make any difference.
___________

Regarding those Medicines Bottles here's some awful recording:



I hope i didn't set it to private again

Could be different on other versions (i've pasted the address for them somewhere on this request pages), in any case is so easy to find, 4 bytes, though it's triggered, adding way too much or too little will crash or could create errors in your saved game and is best to grab 1 or 2 books, than run around until that autosave will save the game and what you've bought, than try again, so you won't start all over gain, that's why is always better to make a backup.On me, they're located in:

DRIVE LETTER:\Users\YOUR NAME\AppData\Roaming\Goldberg SteamEmu Saves

So copy/paste all in there somewhere safe!

[Luke76bg]

Just out of curiosity I've only gotten to the level Sukhothai but is there any point of trying to edit the currency for the Hymalayas map? Since that level doesn't contain any things to buy?

Doesn't make any difference.
___________

Regarding those Medicines Bottles here's some awful recording:



I hope i didn't set it to private again

Could be different on other versions (i've pasted the address for them somewhere on this request pages), in any case is so easy to find, 4 bytes, though it's triggered, adding way too much or too little will crash or could create errors in your saved game and is best to grab 1 or 2 books, than run around until that autosave will save the game and what you've bought, than try again, so you won't start all over gain, that's why is always better to make a backup.On me, they're located in:

DRIVE LETTER:\Users\YOUR NAME\AppData\Roaming\Goldberg SteamEmu Saves

So copy/paste all in there somewhere safe!

i did the same, the table recognize the amount in game correctly, but when changed it remain the same in the game

[softstar]

@VampTY, Thanx for your Table, i am for now at Sukhothai
but i have a strange bug (maybe a game bug,i don't know)
i make the quest where i must collect the 24 ancient relics
i have 12 for now, but suddenly, it shows 50 in my inventory.
so i can't take anymore relics i find , it says i have too much on me
is there a way you could maybe update your table as you did for medecine bottles, but for the ancient relics ?

thanx in advance for your help

[Erik The Born]

It's public that video now .... oopsy

Here's all cvars, there's a lot, so i had to add them in here:



Hope it heps!

interesting! But how do I unlock these console variables like u did?

Actually I did manage to figure it out!

[DeLmoniKo]

It's public that video now .... oopsy

Here's all cvars, there's a lot, so i had to add them in here:



Hope it heps!

interesting! But how do I unlock these console variables like u did?

Actually I did manage to figure it out!

How did you manage to get it to work? I'm trying to get pm_jumpheight working but console returns Unknown command

[VampTY]

How did you manage to get it to work? I'm trying to get pm_jumpheight working but console returns Unknown command

Anyone interested, drop me some PM and i'll send you the files, it won't affect any .exe, is just files regarding the use of the console.Also game is removed, so i can't update!

Have fun!

[Greg.1138]

Hi

I'm new around. I tried some of those tables. They were working fine until I arrived in Egypt, and since then, if I try to attach the game process cheat engine to activate them, I can't open TAB inventory in-game. Is anyone else having this problem?

[iethanhuntz]

Tested both non-steam razor1911 version (latest game version) and steam version. Value is read correctly by the pointer as instructed but changed value does not get populated in journal no matter how many times I change the pages.
This is how I tested: loaded into the game, switched to CE to activate Collectibles [Pointer/Script] Currency [Medicine Bottles], switched back to game, opened journal, switch journal pages for pointer to read the value, switch back to CE, change the value pointer read previously to book value, switch back to game to check journal for change (no change)

medicine cheats it doesn't work for me as well with non steam version, i have one bottle and it remains one bottle!

The cheat works perfectly, and to avoid crashing the game, instead of Opening inventory and trying to populate the values, directly pick up the book that you wish to buy, it will give you the current value of the available medicine in the CT, then you can change it to desired value, it will reflect in-game and then you can buy the book.

[Luke76bg]

Tested both non-steam razor1911 version (latest game version) and steam version. Value is read correctly by the pointer as instructed but changed value does not get populated in journal no matter how many times I change the pages.
This is how I tested: loaded into the game, switched to CE to activate Collectibles [Pointer/Script] Currency [Medicine Bottles], switched back to game, opened journal, switch journal pages for pointer to read the value, switch back to CE, change the value pointer read previously to book value, switch back to game to check journal for change (no change)

medicine cheats it doesn't work for me as well with non steam version, i have one bottle and it remains one bottle!

The cheat works perfectly, and to avoid crashing the game, instead of Opening inventory and trying to populate the values, directly pick up the book that you wish to buy, it will give you the current value of the available medicine in the CT, then you can change it to desired value, it will reflect in-game and then you can buy the book.

It doesn't work!
it shows 20 available, modded by the cheat, but 8 the original amount in the top of the screen, it's not visibile here sorry but it's there, and it ask me to talk with Valeira, i can't do this of course, no prompt of any type, of course i have already bought some books from here previously!

Edit ok this worked but only in Giza and in Sukhotai but not in Vatican, it seems this is a bug in the game, other people have this same problem!

[jkmaybe]

Does NoConsume work on Ancient Relics for the Secret Ending?

Edit: After testing some more, I found that it does.

[adamg11]

Is it just me that when changing the number of bottles the game crashes?

[elreys]

Guys, thanks to your help and some methods with IDA PRO, X64dbg, and CE, I managed to activate the special commands that aren't normally enabled by default on the PC.

I exploited a system vulnerability; basically, every time I use the `listcvars` command, I redirect the call to the address of the hidden functions. In this way, I modified the jump and gravity in the game.

If I manage to create a Trainer in CE, I'll share it with everyone. My goal is to trigger manual saves, and I'm getting close. I know the system serializes the player every time a cutscene starts. If you do it at the beginning in Peru, you can see it for yourself in the console, where you can modify it.

Thanks

Giuseppe

[Link]

[Homex]

Hello friends, I've been working on Indiana Jones steam version with ida and some other things, the only real thing Im interested in is the option to allow pathtracing on non nvidia cards but it seems to be one of the commands that just wont allow me to apply it via command line or the .local file....when I get in console in game I can actually use cvarsadd r_allowpathtracingnonnvidiaGPU 1 in console after already loading in game..... and it applies but wont turn on path tracing or expose any of the options.... I have what i can say is most likely the fastest 7900 xtx in the world...on a voltage mod 1000w+ and custom cooling....I reeeeeally want to shut the green team fanboys up who say over and over they didnt allow PT for any cards but nvidia because it wouldnt work,or be in the single digits fps wise and run to slow or the devs didnt 'have time' to implement it.....I can run the game at 5120x2160 @ 75 fps with no frame gen (amfm since i refuse to pay 5$ for the fsr 3.1 mod) and no upscaling cuz, idc about dlss..So native at above 4k resolution RT maxed at max settings, and that was on 600w barely breaking the 550w bios i flashed onto it..., I truly would love to turn it up and enable path tracing and leave no doubt that the only reason they made the move they did, like not including fsr and PT for AMD becuase green team paid them to do such, and didnt want the 4070 and 4080 guys pissy cuz a radeon was sniffing around the thing they litreally cling to raytracing and now PT as proof of superior hardware (which the 4090 is, but unless they are voltage modded, i've even edged them out.).. and the once again hunt down 4080s and idk about 4070s, alot of them needed modded .exe's to even start PT cuz 12gb ram.... in ray tracing benchmarks at high res (or great looking games at high res) i can see 20+gb vram used.........anyone have any advice? I have actually found the command in IDA decompiling the exe but im an IDA newb and dont really know.... can I change it via ida and recompile or patch the exe? or am I doing something wrong when attempting to enable PT? I have yet to see any frame gen or PT options in the option menu, and i've had rt_enableraytracing 1 and anything I can find that says ray tracing or path tracing out of the 1500 commands I exposed.. and no dice. just no change, the frametimes spike for a sec but no FPS change. And i'd really like to follow up the 8kwuhd video i put out in doom eternals where I was able to squeak out 60+fps at 7680x3420 (or 8k ultra wide) with doom maxed including RT and it was super fucking crissspy, got inspired by a friends badass 4090 video he showed me...just for fun....BUT anyways im rambling

but again I can never get r_allowpathtracingnonnvidiaGPU to enable as a command line options as the game start...... Dev menu seems to not bring anything up and freezes my screen...so No joy there......One thing I've seen some people do is having their cvars sent to some sort of cloud or fake cloud?? Is this similar to having the command in a shortcut of the main exe after the exe path? (+r_AllowPathTracingNonNvidiaGPU 1) This something I should try? I believe im one of maybe 2 ppl really working at this, another guy supposedly got it working... but only showed still screens of it on in the menu..which... doesnt prove or disprove anything.... Thanks in advance for any help... and sorry for terrible gramar and wall of text...been up 36 hours working on this..

So any help with anyone knowledgable in the console or in IDA and can point me how to change the 0 to a 1 in the exe and that should do this....card is 7900 xtx 24gb, so plenty of vram.... though i've tried ignoring ram requirements and changing the ram options with no luck..and a few other suggestions that didnt pan out...Imma keep grinding, but hope someone can offer some experience to a newb.

thanks team.

[elreys]

Hi Homex
i have a solution to do this but i don’t know how good are your skills on Reverse and assembly.
I found away unfortunately not so easy but works