FearLess Cheat Engine

BoehserOnkel wrote: ↑

Sun Apr 26, 2020 6:36 am

Gvaz wrote: ↑

Sun Apr 26, 2020 3:07 am

Ataru wrote: ↑

Sun Apr 26, 2020 2:25 am

You'll want to edit the DefaultStratagyTuning file to change training times.

What parts specifically need to be changed, as an example?

put the file in the directory mentioned
start game , load save - should be fine
if you have ongoing training -restart it

Leoneros wrote: ↑

Sun Apr 26, 2020 5:46 pm

I checked just to be sure after copying the files+lauching the game 2 times without seeing the changes, and i noticed that the files in Documents were overwritten each time the game was launching and reverting to the values in the defaults.

The only way i could make work was then to change the values in the default files in the installation folder.

BoehserOnkel wrote: ↑

Sat Apr 25, 2020 11:51 am

some tweaks

research 1 round
replace(make backup of file first) : \ Documents\My Games\XCOM Chimera Squad\XComGame\Config XComResearch.ini

1 round research
research1round.rar
OR THIS
1 round research + get elerium instead paying
research1round+elerium.rar


some startegic tweaks , like 4 places for training
replace(make backup of file first) : \ Documents\My Games\XCOM Chimera Squad\XComGame\Config XComStrategyTuning.ini
xccs.rar
OR THIS
1 round specops and training added to the file above
1 round specops+train.rar


allweaponstypes for all
weaponsforall.rar

password:1974
have fun

debug mode and cheats


you can use the "PowerUp" command to get a god-mode
look here how -->

To activate the console, you must first add the following as a command line parameter to XCOM :
-allowconsole
(if you add "-autodebug" too you can start a game with almost all items )
[Link]

Rightclick the XCOM 2 shortcut(on your desktop), select properties and add it at the end of the "Target"-field so that it looks something like this:
\XCOM xxxxxxxxxxxx\Binaries\Win64\XCom.exe" -allowconsole -autodebug

"""""""If using Steam, rightclick the game in your Library, select Properties and add it under "Set launch options".
(does not work for some people - so use method above)""""""""""

Open the console in-game using the ~ button (should be tilde button)


type Powerup , press enter - bäähm



edit: if you have trouble after enabeling console add this -noRedScreens (before -allowconsole)
should look like this \XCOM Chimera Squad\Binaries\Win64\xcom.exe" -noRedScreens -allowconsole -autodebug

usefull cheats :


giveMeTonsOfResources xxxxxxx

GiveFieldTeam x

PromoteAllMax

giveAllItems xxxx

unlockAllResearch

Csimbi wrote: ↑

Fri Apr 24, 2020 1:42 pm

Pretty stupid game if you ask me, great example of how XCOM is gradually washed down to... not XCOM.

Claudesam wrote: ↑

Tue Apr 28, 2020 3:35 am

Hello, I'am New Here, I have a question
which character stats that i should change on the XComGameData_CharacterStats.ini?

this (The first one)
([XComAndroid X2CharacterTemplate]
CharacterBaseStats[eStat_HP]=8 ;XComAndroid
CharacterBaseStats[eStat_ArmorMitigation]=0 ;XComAndroid
CharacterBaseStats[eStat_ArmorChance]=100 ;XComAndroid
CharacterBaseStats[eStat_Dodge]=0 ;XComAndroid
CharacterBaseStats[eStat_Defense]=0 ;XComAndroid
CharacterBaseStats[eStat_Mobility]=10 ;XComAndroid
CharacterBaseStats[eStat_Initiative]=0 ;XComAndroid
CharacterBaseStats[eStat_Offense]=65 ;XComAndroid
CharacterBaseStats[eStat_CritChance]=0 ;XComAndroid
CharacterBaseStats[eStat_FlankingCritChance]=33 ;XComAndroid
CharacterBaseStats[eStat_Will]=50 ;XComAndroid
CharacterBaseStats[eStat_PsiOffense]=0 ;XComAndroid
CharacterBaseStats[eStat_Hacking]=5 ;XComAndroid
CharacterBaseStats[eStat_HackDefense]=0 ;XComAndroid
CharacterBaseStats[eStat_Strength]=40 ;XComAndroid
CharacterBaseStats[eStat_UtilityItems]=1 ;XComAndroid
CharacterBaseStats[eStat_SightRadius]=27 ;XComAndroid
CharacterBaseStats[eStat_DetectionRadius]=9 ;XComAndroid
CharacterBaseStats[eStat_BackpackSize]=3 ;XComAndroid
CharacterBaseStats[eStat_AlertLevel]=2 ;XComAndroid



or this the second?

[XComAndroid_Diff_0 X2CharacterTemplate]
CharacterBaseStats[eStat_HP]=10 ;XComAndroid_Diff_0
CharacterBaseStats[eStat_Defense]=5 ;XComAndroid_Diff_0
CharacterBaseStats[eStat_Offense]=75 ;XComAndroid_Diff_0
CharacterBaseStats[eStat_CritChance]=15 ;XComAndroid_Diff_0
CharacterBaseStats[eStat_FlankingCritChance]=40 ;XComAndroid_Diff_0
CharacterBaseStats[eStat_Will]=60 ;XComAndroid_Diff_0

whats the difference?

Arjik wrote: ↑

Tue Apr 28, 2020 6:53 am

The second array refers to Diff_0 - Difficulty 0 or Story difficulty by in-game options.
So the first array contains stats for XCOM Androids on every difficulty and second one only contains the changed values for Story difficulty, the rest are unchanged.

BoehserOnkel wrote: ↑

Sat Apr 25, 2020 11:51 am

some tweaks

research 1 round
replace(make backup of file first) : \ Documents\My Games\XCOM Chimera Squad\XComGame\Config XComResearch.ini

1 round research
research1round.rar
OR THIS
1 round research + get elerium instead paying
research1round+elerium.rar


some startegic tweaks , like 4 places for training
replace(make backup of file first) : \ Documents\My Games\XCOM Chimera Squad\XComGame\Config XComStrategyTuning.ini
xccs.rar
OR THIS
1 round specops and training added to the file above
1 round specops+train.rar


allweaponstypes for all
weaponsforall.rar

password:1974
have fun

debug mode and cheats


you can use the "PowerUp" command to get a god-mode
look here how -->

To activate the console, you must first add the following as a command line parameter to XCOM :
-allowconsole
(if you add "-autodebug" too you can start a game with almost all items )
[Link]

Rightclick the XCOM 2 shortcut(on your desktop), select properties and add it at the end of the "Target"-field so that it looks something like this:
\XCOM xxxxxxxxxxxx\Binaries\Win64\XCom.exe" -allowconsole -autodebug

"""""""If using Steam, rightclick the game in your Library, select Properties and add it under "Set launch options".
(does not work for some people - so use method above)""""""""""

Open the console in-game using the ~ button (should be tilde button)


type Powerup , press enter - bäähm



edit: if you have trouble after enabeling console add this -noRedScreens (before -allowconsole)
should look like this \XCOM Chimera Squad\Binaries\Win64\xcom.exe" -noRedScreens -allowconsole -autodebug

usefull cheats :


giveMeTonsOfResources xxxxxxx

GiveFieldTeam x

PromoteAllMax

giveAllItems xxxx

unlockAllResearch

frivolousam wrote: ↑

Mon Apr 27, 2020 3:52 pm

Yeah I get how it should work but there are 3 slots atm but only 1 slot works, clicking on other slots and selecting a different soldier just replaces the first guy.

e21399145 wrote: ↑

Fri Apr 24, 2020 9:32 pm

Had bugs.... Always full health if used it.

lblRankReader:
//cmp dword ptr [rcx+7c4], 0
cmp byte ptr [rcx+e6], 2   // check if player
mov eax,[rcx+00000108]     // original code
jne lblRankReaderRet       // return if not player
// Health

label(isciv)
label(isenemy)
label(enemyweak)
label(isplayer)

lblRankReader:
  cmp byte ptr [rcx+e6], 2   // check if player
  mov eax,[rcx+00000108]     // original code
  je isplayer
  cmp byte ptr [rcx+e0], 20  // Android player
  je isplayer  
  cmp byte ptr [rcx+e1], 2
  je isciv
isenemy:
   cmp dword ptr [rcx+OFFSET_HEALTH], (float)2.0
   jbe enemyweak
   mov dword ptr [rcx+OFFSET_HEALTH], (float)2.0   // make enemy weak
enemyweak:
   jmp lblRankReaderRet
isciv:
   mov dword ptr [rcx+OFFSET_HEALTH], (float)10.0  // make civilian strong
   jmp lblRankReaderRet
isplayer:
// Health