Monster Hunter World (Steam)

[nos4r2]

sorry i meant 6th pursuit not 4th. it not like a normal monster hunt, either way ask on reddit not on here this is for cheats

Well you can break horns on 2nd pursuit. Can't really post on Reddit cause they don't allow cheats and I'm testing this with cheats...

It seems I found the pointers to hack the pursuit level, but I'm not sure whether they have pointers to each level since I found level 1 and 6 has different pointer. Anyway only I found 2 but it's enough to make this cheat works.
All you need to do is set the values to 2600(pointes required to level 6), and freeze them. Then follow these steps:

0. Must be you to host the session
1. Set the values to 2600(pointes required to level 6)
2. Freeze them, so it won't drop to zero when you accept the siege
3. Go accept the Kulve siege quest, but this monent the "REAL" Pursuit level is still 1
4. Cancel the quest and let the system re-detect your pursuit level; meanwhile you should see the pursuit level is not 6(if it is just start the quest).
5. Accept the quest again, talk to Quest Counter and you should see your pursuit level is 6
6. Enjoy!

Also modify the "Might Seed/Pill Attack+" in Berserk Knight's table or weapon base damage(if the game won't crash) so you can solo the Kulve around 10 minutes.

BTW your friends can join your siege too, but they'll see your pursuit level is 1...anyway, after quest starts the Kulve's parts are easily to break as the effect of level 6 p.level

I never able to get it work any idea what i'm doing wrong? i'm do it exactly like you said step by step but for me the when i accept quest first time it still pursuit lvl 1 even i'm freeze 2600 point so when i'm cancel and accept quest again then talk to check it still level 1

How to use this cheat table?

1. Install Cheat Engine
2. Double-click the .CT file in order to open it.
3. Click the PC icon in Cheat Engine in order to select the game process.
4. Keep the list.
5. Activate the trainer options by checking boxes or setting values from 0 to 1

[mrdead]

Can we compile ways to beat the Kulve Taroth quest here (using Cheat Engine)? There are a lot of ways, but most will cause crashing.
These are from what I have skimmed from reading the topic.

Kulve Taroth Quest clearing method
1. Easily break monster parts (I managed to make it long enough, Kulve leaves, never touched the quest again, then the game crashes)
2. Infinite Health, Stamina, etc using Squall8 CHK7 script (no crash)
3. Pursuit level hack using Compeador's table from page 142 (no crash)
4. Demon drug/Pills/Seed of Might/Buff increase hack (not sure if crash)
5. Weapon attack power increase hack (not sure if it has a cap, not sure if crash)

Kulve Taroth Weapon obtaining method
1. Create Kulve weapon in new inventory slot (Berserk Knight's table, not sure if crash)
2. Buy cheap dummy weapons from Workshop, swap them with Kulve's weapon (Berserk Knight's table, no crash, tested by me)
3. Gives unidentified Sublimated weapon, Meld weapons from Kulve's quest, appraise later (Berserk Knight's table, not sure if crash)

Inf Mantle Duration (rockmantle) + Inf demon mode (with DB) or Inf spirit gauge (with LS) + Super Buffed + Mightseed buff in "[Pointer Found By @Berserk Knight]" increases raw damage.

Before entering siege buy Sublimated relics from item shop (with All Item Shop mod, page 4). Return from quest after releasing kulve and create a new session so you end the siege and get the rewards.

yes this is the best way for now. if you want to solo kulve or coop kulve its better to play normally right now

[Chacha Puma]

"Highlighted Armor Editor" and "Easily Break Monster Parts" Crashed the game. I am sorry for my bad English.

[proxxymus]

Can anyone explain how to actually use Berserk Knight's table to change weapons into KT weapons?

[JollyGood]

Can anyone explain how to actually use Berserk Knight's table to change weapons into KT weapons?

There's a YouTube video a few pages back, and it's better than any text description. Go check it out.

[Compeador]

Well you can break horns on 2nd pursuit. Can't really post on Reddit cause they don't allow cheats and I'm testing this with cheats...

It seems I found the pointers to hack the pursuit level, but I'm not sure whether they have pointers to each level since I found level 1 and 6 has different pointer. Anyway only I found 2 but it's enough to make this cheat works.
All you need to do is set the values to 2600(pointes required to level 6), and freeze them. Then follow these steps:

0. Must be you to host the session
1. Set the values to 2600(pointes required to level 6)
2. Freeze them, so it won't drop to zero when you accept the siege
3. Go accept the Kulve siege quest, but this monent the "REAL" Pursuit level is still 1
4. Cancel the quest and let the system re-detect your pursuit level; meanwhile you should see the pursuit level is not 6(if it is just start the quest).
5. Accept the quest again, talk to Quest Counter and you should see your pursuit level is 6
6. Enjoy!

Also modify the "Might Seed/Pill Attack+" in Berserk Knight's table or weapon base damage(if the game won't crash) so you can solo the Kulve around 10 minutes.

BTW your friends can join your siege too, but they'll see your pursuit level is 1...anyway, after quest starts the Kulve's parts are easily to break as the effect of level 6 p.level

I never able to get it work any idea what i'm doing wrong? i'm do it exactly like you said step by step but for me the when i accept quest first time it still pursuit lvl 1 even i'm freeze 2600 point so when i'm cancel and accept quest again then talk to check it still level 1

It seems the pointer I found not works on some computers, probably due to different environment, I found these on my PC(x64 Windows 7 with AMD CPU), tbh I'm not an expert of CE, just know how PE and pointers works....(yeah I'm just a high-level programmer and dunno how to script finely low-level assembly).

Anyway, MHW doesn't encrypt the values so you can still hack it in old fashion way, note that the PP is strictly increasing, don't be cheated with the value on screen(unless the siege is completed it'll reset).
<Pursuit Points showed = Real PP - Points required previous level>

0. PP is 4bytes int so scan 4 bytes, exact value '0', this will take a while...
1. Go for the siege with your OP attack, just try making the PP value change(duh). You don't really have to beat Kulve, play with her around 5 minutes, pickup some golden scales...then leave the quest
2. IMPORTANT! On the result it'll show how many PP you gained in this siege, take a note of that and search for:
<Your previous PP + PP gained from last siege>
for example if I have 0p and I got 20p from last I should scan for 20; if I have 20p and I got 30p from last I should scan 50......
3. Repeat the step 1 and 2 until you only have few possible values left, find the correct one by editing the value(+1 or -1) and see whether the PP in Quest Counter changed.
4. Pointer scan the correct value, and find the static address of it. If don't know how just google it, already tons of tutorials of that. If the pointer scan found nothing you'll have to do it manually.
5. Here comes the tricky one, when I firstly find the pointer it works only one time after I completed the siege, so I have no choice but do the process again and resulted in anohter different pointer. Then I did what I post and everything works perfectly.

Hope this helps, happying cheating!

[lucasallucas]

It seems the pointer I found not works on some computers, probably due to different environment, I found these on my PC(x64 Windows 7 with AMD CPU), tbh I'm not an expert of CE, just know how PE and pointers works....(yeah I'm just a high-level programmer and dunno how to script finely low-level assembly).

Anyway, MHW doesn't encrypt the values so you can still hack it in old fashion way, note that the PP is strictly increasing, don't be cheated with the value on screen(unless the siege is completed it'll reset).
<Pursuit Points showed = Real PP - Points required previous level>

0. PP is 4bytes int so scan 4 bytes, exact value '0', this will take a while...
1. Go for the siege with your OP attack, just try making the PP value change(duh). You don't really have to beat Kulve, play with her around 5 minutes, pickup some golden scales...then leave the quest
2. IMPORTANT! On the result it'll show how many PP you gained in this siege, take a note of that and search for:
<Your previous PP + PP gained from last siege>
for example if I have 0p and I got 20p from last I should scan for 20; if I have 20p and I got 30p from last I should scan 50......
3. Repeat the step 1 and 2 until you only have few possible values left, find the correct one by editing the value(+1 or -1) and see whether the PP in Quest Counter changed.
4. Pointer scan the correct value, and find the static address of it. If don't know how just google it, already tons of tutorials of that. If the pointer scan found nothing you'll have to do it manually.
5. Here comes the tricky one, when I firstly find the pointer it works only one time after I completed the siege, so I have no choice but do the process again and resulted in anohter different pointer. Then I did what I post and everything works perfectly.

Hope this helps, happying cheating!

can we talk on steam or something i need some help with this : lucasallucas

[JollyGood]

Question for people who really want to do/complete the siege, do you want to do the siege because you want to play the siege or you just want to get over with it and claim rewards?

Both but for now only the Rewards since most random groups you join just don't get how kulve works and it usually runs away..

Yeah it's laregly a matter of luck, but I think more and more people are catching on how to complete the quest. 2 days ago most players had no idea what to do, but yesterday I managed to do 2 horn breaking runs with almost no one fainting. The biggest issue I have encountered is trying to lure Kulve to the stalagmites in area 3. Too many players stay in the starting point of area 3 after dropping the first stalagmites.

[vosszaa]

Can anyone explain how to actually use Berserk Knight's table to change weapons into KT weapons?

viewtopic.php?p=67003#p67003

[lucasallucas]

can anyone help me with the table ? im very bad at cheat engine , im trying to cheat the event of the kulva

[Shirokaido]

I hope someone can sound off on this. It was mentioned some dozen or so pages ago that you can make pouch items infinite by altering the itemData.itm file. Does anyone remember what this was?

[Eternallydissolved]

item.zip

Item and skill gem parameter files, add to nativepc\common

(9.28 KiB) Downloaded 53 times

Equip.zip

Modified skills file for easier kulve wrecking add to nativepc\common

(1.52 KiB) Downloaded 196 times

In your monster hunter world folder on your pc, if you do not already have one, create a folder called nativePC in the mhw folder then open that folder and create one named common. Extract these files to nativePC\common and boot into the game. dont want them anymore, simply delete the files, or entire nativepc folder.

This mod set i am posting includes idlehands88's skill gem mod which will allow you to max the any skills you add to an armor set using one decoration and my modified item file which will allow you to purchase the sublimated weapons if your using the all items in shop mod from the nexus for a price of 1 zenny per weapon; allow you to keep throwing knives of all types as a standard item instead of losing them at the end of the quest as well as allowing 125 of any item or ammo of your choosing to be carried in the item pouch.

Now for the damage help, instant greatsword charge, ect lost with the table problems at the moment, i am also posting my modified skills file. Focus level 3 = instant greatsword charge just like the fearlessrevolution +45 trainer, tool specialist level 3 = 0 cooldown between mantle usage so spamming the rocksteady is possible, when it runs out, just remove it and reequip, profit. Attack boost level 7 set for attack +90 and affinity +130% allowing you to wield even jho weapons which default at -30% affinity at an affinity level of 100% and lots of other goodies. oh, and for kulve run partbreaker level 3 as it is set for part damage + ~1200%

I hope someone can sound off on this. It was mentioned some dozen or so pages ago that you can make pouch items infinite by altering the itemData.itm file. Does anyone remember what this was?

Going over 127 or 7f in hex will allow for a negative value and infinite items as i understand it, but it is also buggy so 125 to 127 is probably the safer choice

can we talk on steam or something i need some help with this : lucasallucas

Quoted you so the notification would lead you directly to the post

[terry4756]

Hi everyone, I have finded the pointer of Kulve Pursiut Points, help my to test it if it is work to another people.
Do not post it without any link on here and don't post it on chinese game website like 3dm

[Mrnerdisg0d]

I Made a Discord Channel in my own Channel for everyone in Fearless If you wanna join Click the link its only Valid for 1 day.

[Link]

[vosszaa]

Dont really wanna hijack this but seeing a lot of people have problem with game crashing so I made a fearlessrevolution trainer thread which has some useful options to get you through the KTS

viewtopic.php?f=5&t=8200

Please post questions and help over there and not here. Thank you