How to find last moved item and last selected character + stats

Anything Cheat Engine related, bugs, suggestions, helping others, etc..
Post Reply
User avatar
Forever Alone
Cheater
Cheater
Posts: 28
Joined: Fri Mar 03, 2017 4:35 am
Reputation: 2

How to find last moved item and last selected character + stats

Post by Forever Alone » Tue May 16, 2017 10:52 am

I was trying to get last moved item by changing the durability and when i get the address i used dissect data/structures to find (at least) its stats or quanity, but i didn't find one.
For last selected character i was scanning 1 0 1 0 (i think you will get it) i get it and tried to get his stats without finding them by normal scan by using (again) dissect data/structures and i get useless addresses(i think so) , then i tried to get just a static addresses for stats by finding them manually and trying to find the static by using multi-level pointer and again failed after first pointer.(also when i searched for stats i get about 5 addresses and only one of them real this also happend when i searched for 1 0 1 0 and came up with 5 or more addresses(i tried to dissect all of them in groups)).And the game is Divinity Original Sin 2.(sorry for bad eng)

Squall8
Expert Cheater
Expert Cheater
Posts: 201
Joined: Fri Mar 03, 2017 7:43 am
Reputation: 114

Re: How to find last moved item and last selected character + stats

Post by Squall8 » Tue May 16, 2017 12:51 pm

If you're taking about making a mouseover pointer you need to find something each item/character has in common. Such as item id/quantity or character id/stats and so on. Once you found a good value, debug with 'what accesses'. Then quickly hover over the item or character. You should see an instruction pop up when you do. Use that instruction as your injection point.

User avatar
Forever Alone
Cheater
Cheater
Posts: 28
Joined: Fri Mar 03, 2017 4:35 am
Reputation: 2

Re: How to find last moved item and last selected character + stats

Post by Forever Alone » Tue May 16, 2017 3:19 pm

Squall8 wrote:
Tue May 16, 2017 12:51 pm
If you're taking about making a mouseover pointer you need to find something each item/character has in common. Such as item id/quantity or character id/stats and so on. Once you found a good value, debug with 'what accesses'. Then quickly hover over the item or character. You should see an instruction pop up when you do. Use that instruction as your injection point.
Tried to do this and came up with the problem that when i hover over it doesn't give me any instructions,also i tried to split the item and do something like zanzer did in his table and i came up with this

Code: Select all

[ENABLE]
aobscanmodule(last_item_moved,EoCApp.exe,41 8B 96 2C 01 00 00 49) // should be unique
alloc(newmem,$1000,last_item_moved)

label(code)
label(return)
label(last_item_moved_ptr)

newmem:
  mov rdx,last_item_moved_ptr
  mov [rdx],r14
code:
  mov edx,[r14+0000012C]
  jmp return

last_item_moved_ptr:
  dq 0

last_item_moved:
  jmp newmem
  nop
  nop
return:
registersymbol(last_item_moved)
registersymbol(last_item_moved_ptr)

[DISABLE]

INJECT:
  db 41 8B 96 2C 01 00 00

unregistersymbol(last_item_moved)
unregistersymbol(last_item_moved_ptr)
dealloc(newmem)

{
// ORIGINAL CODE - INJECTION POINT: "EoCApp.exe"+9A997D

"EoCApp.exe"+9A9949: 48 8B 0D 48 C6 C5 00        -  mov rcx,[EoCApp.exe+1605F98]
"EoCApp.exe"+9A9950: E8 5B F0 E8 FF              -  call EoCApp.exe+8389B0
"EoCApp.exe"+9A9955: 48 8B C8                    -  mov rcx,rax
"EoCApp.exe"+9A9958: 48 C7 44 24 28 00 00 00 00  -  mov [rsp+28],00000000
"EoCApp.exe"+9A9961: 48 8D 05 58 D4 C5 00        -  lea rax,[EoCApp.exe+1606DC0]
"EoCApp.exe"+9A9968: 4C 8B C3                    -  mov r8,rbx
"EoCApp.exe"+9A996B: 4C 8D 4C 24 40              -  lea r9,[rsp+40]
"EoCApp.exe"+9A9970: 48 89 44 24 20              -  mov [rsp+20],rax
"EoCApp.exe"+9A9975: 48 8B D7                    -  mov rdx,rdi
"EoCApp.exe"+9A9978: E8 43 2F FF FF              -  call EoCApp.exe+99C8C0
// ---------- INJECTING HERE ----------
"EoCApp.exe"+9A997D: 41 8B 96 2C 01 00 00        -  mov edx,[r14+0000012C]
// ---------- DONE INJECTING  ----------
"EoCApp.exe"+9A9984: 49 8B CE                    -  mov rcx,r14
"EoCApp.exe"+9A9987: 2B D6                       -  sub edx,esi
"EoCApp.exe"+9A9989: 48 8B D8                    -  mov rbx,rax
"EoCApp.exe"+9A998C: E8 AF BF FC FF              -  call EoCApp.exe+975940
"EoCApp.exe"+9A9991: 8B D6                       -  mov edx,esi
"EoCApp.exe"+9A9993: 48 8B CB                    -  mov rcx,rbx
"EoCApp.exe"+9A9996: E8 A5 BF FC FF              -  call EoCApp.exe+975940
"EoCApp.exe"+9A999B: 49 8D 96 F8 00 00 00        -  lea rdx,[r14+000000F8]
"EoCApp.exe"+9A99A2: 48 8B CB                    -  mov rcx,rbx
"EoCApp.exe"+9A99A5: E8 06 AF FC FF              -  call EoCApp.exe+9748B0
}
i think i messed up

Squall8
Expert Cheater
Expert Cheater
Posts: 201
Joined: Fri Mar 03, 2017 7:43 am
Reputation: 114

Re: How to find last moved item and last selected character + stats

Post by Squall8 » Tue May 16, 2017 9:45 pm

You may have to dig a little deeper in the item structure. There is usually a byte that refers to what kind of item it is. For example, 0=materials, 1=consumables, and 2=key items. If you can find that byte and do the same process as I mentioned above, you should be able to make a successful mouseover script.

Alternatively you can try the same steps as above, except instead of hovering over an item just move it.

Post Reply

Who is online

Users browsing this forum: No registered users